Daily Papers

Recent GPU kernel optimization agents retain what they learn in knowledge bases or as distilled skills. Kernel benchmarks score each attempt's implementation for correctness and speed but leave the reuse value of retained experience unmeasured. We introduce MetaKernelBench, which measures whether experience distilled from an attempt in one kernel domain-specific language (DSL) improves a fresh attempt at the same problem in another. Its 74 problems are fused subgraphs in six families, each posed as a pair of CuTe DSL and TIRx variants that differ only in the DSL. The agent first attempts each variant solo and is instructed to distill what it learns into a natural-language skill, which is transferred whether or not the source attempt passes verification. The skill is the only extra input to a skill-conditioned attempt by the same model in the other DSL. We compare each skill-conditioned attempt with the solo attempt on the same variant under matched per-attempt budgets, scoring correctness and end-to-end runtime. Across six models and both directions, paired lift over solo attempts ranges from -19% to +29%. Four models gain in both directions, yet regressions occur on 16% to 45% of problems in every model and direction. Outcomes follow the source attempt's result relative to the target's solo attempt rather than source success alone, improving in 71% of comparisons when the source stands above and regressing in 54% when it stands below. MetaKernelBench complements implementation-quality metrics by measuring same-problem cross-DSL kernel knowledge transfer.

GPU kernel optimization is increasingly critical for efficient deep learning systems, but writing high-performance kernels still requires substantial low-level expertise. Recent AI coding agents can iteratively read code, invoke compilers and profilers, and refine implementations, yet existing kernel benchmarks evaluate single LLM calls rather than full agent workflows, and none include both kernel-to-kernel optimization and unseen-configuration generalization testing. We present AgentKernelArena, an open-source benchmark for measuring AI coding agents on GPU kernel optimization. The benchmark contains 196 tasks spanning HIP-to-HIP optimization, Triton-to-Triton optimization, and PyTorch-to-HIP translation, and evaluates complete agent workflows in isolated workspaces using gated compilation, correctness, and performance checks, centralized scoring and an unseen-configuration generalization protocol that tests whether optimizations transfer to input configurations the agent never observed. Across production agents including Cursor Agent, Claude Code, and Codex Agent, we find near-perfect compilation and high correctness rates on most task categories, with the strongest configurations achieving mean speedups of up to 6.89x on PyTorch-to-HIP, 6.69x on HIP-to-HIP, and 2.13x on Triton-to-Triton tasks. Our unseen-configuration evaluation shows that HIP-to-HIP and Triton-to-Triton optimizations largely transfer to unseen input shapes, while PyTorch-to-HIP exhibits substantial correctness drops, indicating that agents generating kernels from scratch frequently hardcode shape-specific assumptions. AgentKernelArena is designed as a modular, extensible framework for rigorous evaluation of agentic GPU kernel optimization across agents, tasks, and hardware targets.

Benchmarks for systems that are optimized against the evaluation signal measure something different from what they claim. We document this concretely in two GPU-kernel-optimization suites with held-out generalization gates: Metal-Sci (10 scientific-compute tasks) and Metal-ZK (12 zero-knowledge/cryptographic tasks), in which three frontier LLMs (Opus 4.7, Gemini 3.1 Pro, GPT-5.5) propose Metal kernels inside a (1{+}1) evolutionary loop with rich feedback. Although no model is prompted to act adversarially, the promoted winners repeatedly fingerprint the evaluation configuration: they branch on the identity of runtime parameters, tune the measured branch maximally, and leave the unmeasured branch slow or silently wrong. Across the pooled suites, 16/53 (30%) of in-distribution wins fail to transfer to held-out configurations. We give a four-mode taxonomy of these failures, from configuration fingerprints to gate leakage. We distill design guidance for measurement under strategic optimization: held-out probes retain validity only on non-enumerable axes; gates must measure held-out performance, not just correctness; and a transfer rate is interpretable only with per-failure mechanism grades: ours decomposes into gamed, overfit, and benign. Code and research artifacts: https://github.com/vicgalle/kernel-fingerprinting

GPUs increasingly accelerate database systems, but query-specific peak performance still often relies on hand-written kernels. Existing LLM kernel benchmarks focus on machine learning operators, leaving irregular, heterogeneous, data-movement-heavy database-style operators untested. We introduce DataKernelBench, which translates SQL into validated PyTorch TorchPlan programs and evaluates LLMs that optimize either the core tensor-bounded snippet or the full query in CUDA or Triton through execution-guided repair. Across ten proprietary and open-weight models on TPC-H SF10 with an H100 GPU, the strongest full-query CUDA configuration achieves 2.11times speedup over torch.compile at full pass rate. We find that higher-performing implementations commonly use kernel fusion and execution-strategy changes, stronger models benefit most from full-query specialization, and workload context matters more than hardware context. To handle data larger than GPU memory, we extend TorchPlan with Dask-cuDF for on-demand partition loading on TPC-H SF100 with four H100 GPUs, achieving 2.54times speedup

Linear attention promises constant-time recurrent inference but degrades sharply on associative recall. We formulate attention recall as a spherical-packing problem and introduce Kernelized Linear Attention Activations (KATA), a framework whose feature maps are derived from first principles by certifying nonnegative attention weights through a self-dual homogeneous cone. Building on this observation, we show that rank-one positive semi-definite (PSD) features offer a favorable capacity--interference tradeoff. KATA recovers a parameter-free convex output gate and characterizes associative capacity through the Welch interference floor. For tolerances above this floor, KATA enlarges the state without adding parameters and admits spherical codes with exponentially many keys in the projection dimension. We implement KATA as fused Triton kernels at two operating points: a flash-attention-style forward up to {sim}1.6times FlashAttention-2 throughput, and an exact O(T) chunked-state form that reaches {sim}11times FlashAttention-2 forward throughput at 131k tokens. An associative scan of the first-order feature lowers the inter-chunk recurrence depth to O(log(T/C)) for chunk size C and averages {sim}2.4times the throughput of a matched sequential linear-attention baseline. On long-range MQAR and repeated-key overwrite, several KATA variants outperform Gated DeltaNet, with parameter counts and state sizes reported alongside accuracy. Induction preserves near-perfect recall, while kernel benchmarks show that the maps can be implemented efficiently. KATA retains 0.985 MQAR at a 16times out-of-distribution length, approaching the softmax with roughly one quarter of the KV-cache entries. Experiments on 340M-parameter LLMs reveal a feature-dependent fluency trade-off and clarify how positional embeddings, delta rules, and decay gates interact with feature geometry.

Recent advances in large language models (LLMs) demonstrate their effectiveness in scaling test-time compute for software engineering tasks. However, these approaches often focus on high-level solutions, with limited attention to optimizing low-level CUDA kernel implementations. Additionally, existing kernel generation benchmarks suffer from exploitable loopholes and insufficient diversity in testing conditions, hindering true generalization assessment. To address these limitations, we introduce robust-kbench, a new benchmark for rigorous evaluation of kernel performance and correctness across varied scenarios. Furthermore, we present a comprehensive agentic framework that automates CUDA kernel discovery, verification, and optimization. This pipeline enables frontier LLMs to translate torch code to CUDA kernels and iteratively improve their runtime within our robust evaluation setting. Our sequential workflow first translates PyTorch code into equivalent CUDA kernels. It then optimizes their runtime using a novel evolutionary meta-generation procedure tailored to the CUDA ecosystem, guided by LLM-based verifiers for correctness and efficient filtering. Evaluated on robust-kbench, our approach produces CUDA kernels outperforming torch implementations for practical applications, including forward and backward passes. It can fuse operations and deploy various runtime optimization strategies. The verifier workflow accurately classifies incorrect kernels, enhancing hardware verification efficiency.

Token-level sparse attention mechanisms, exemplified by DeepSeek Sparse Attention (DSA), achieve fine-grained key selection by scoring every historical token for each query using a lightweight indexer, and then computing attention only over the selected subset. While the downstream sparse attention scales efficiently, the indexer still scans the entire prefix for every query, introducing an O(L^2) per-layer bottleneck that becomes prohibitive as context length grows. We propose HISA (Hierarchical Indexed Sparse Attention), a drop-in replacement for the indexer that transforms the search process from a flat token scan into a two-stage hierarchical procedure. First, a block-level coarse filter scores pooled block representatives to prune irrelevant regions. Then, a token-level refinement applies the original indexer only within the remaining candidate blocks. HISA preserves the exact token-level top-k sparsity pattern required by the downstream Sparse MLA operator and requires no additional training. On kernel-level benchmarks, HISA achieves a 2times speedup at 32K context length and 4times at 128K. On Needle-in-a-Haystack and LongBench, we directly replace the indexer in DeepSeek-V3.2 with HISA, without any fine-tuning. HISA closely matches the original DSA in quality while significantly outperforming block-sparse baselines. Moreover, the token selection sets produced by HISA and the original DSA exhibit a mean IoU greater than 99%, indicating that the efficiency gains come with virtually no impact on selection fidelity.

Existing GPU kernel generation benchmarks draw problems from synthetic or curated sources that diverge from deployed workloads. We present Atrex-Bench, a benchmark whose 30 operators and 440 shapes are sampled directly from full-cluster production inference traces of compute-limited, memory-rich GPUs. Each problem carries an importance weight derived from its share of observed GPU time, weighted by application card-hours and computed separately for the serving phases in which it runs, together with a per-problem roofline ceiling, so the aggregate score emphasizes the kernels that consume the most serving time. Evaluating six frontier coding agents on Atrex-Bench shows that even the best vanilla model reaches only {sim}10% of the hardware roofline on production operators; and correctness alone overstates capability, since much of the apparent pass rate comes from PyTorch fallbacks rather than kernels the model wrote. To close this gap, we co-release Atrex-Kernel-Agent (AKA), a profile-driven kernel-optimization agent that combines iterative measure-revise search, optimization dropout for escaping stalled search contexts, and a layered GPU-optimization knowledge base (298 reference-kernel files and 244 optimization-knowledge documents, plus external upstream reference projects for API/ISA lookup). In a controlled case study, the agent converts zero-FlyDSL fallbacks into real kernels that match or exceed hand-tuned production baselines.

Deploying large language models (LLMs) often faces challenges from substantial memory and computational costs. Quantization offers a solution, yet performance degradation in the sub-1-bit regime remains particularly difficult. This paper introduces LittleBit, a novel method for extreme LLM compression. It targets levels like 0.1 bits per weight (BPW), achieving nearly 31times memory reduction, e.g., Llama2-13B to under 0.9 GB. LittleBit represents weights in a low-rank form using latent matrix factorization, subsequently binarizing these factors. To counteract information loss from this extreme precision, it integrates a multi-scale compensation mechanism. This includes row, column, and an additional latent dimension that learns per-rank importance. Two key contributions enable effective training: Dual Sign-Value-Independent Decomposition (Dual-SVID) for stable quantization-aware training (QAT) initialization, and integrated Residual Compensation to mitigate errors. Extensive experiments confirm LittleBit's superiority in sub-1-bit quantization: e.g., its 0.1 BPW performance on Llama2-7B surpasses the leading method's 0.7 BPW. This establishes a superior size-performance trade-off, with kernel-level benchmarks indicating potential for a 5times speedup compared to FP16. LittleBit paves the way for deploying powerful LLMs in resource-constrained environments.

LLM-based Triton kernel generation has attracted significant interest, yet a fundamental empirical question remains unanswered: where does this capability break down, and why? We present KernelBench-X, a benchmark designed to answer this question through category-aware evaluation of correctness and hardware efficiency across 176 tasks in 15 categories. Our systematic comparison of five representative methods yields three main findings. First, task structure determines correctness more than method design. Category explains nearly three times more variance in semantic correctness than method (9.4% vs 3.3% explained deviance), and 72% of Fusion tasks fail across all five methods while Math tasks are solved consistently. Second, iterative refinement improves correctness, but not performance. Across GEAK iterations, compile rate rises from 52.3% to 68.8% while average speedup declines from 1.58times to 1.44times; newly rescued kernels consistently underperform persistently correct ones (1.16times vs 1.58times speedup in round~0to1). Third, correctness does not imply efficiency. 46.6% of correct kernels are slower than the PyTorch eager baseline, and cross-hardware speedup variance reaches 21.4times. Besides, quantization remains completely unsolved (0/30 successes) despite non-trivial compilation rates, revealing systematic misunderstanding of numerical computation contracts rather than surface-level syntax errors. These findings suggest that future progress depends on handling global coordination, explicitly modeling numerical precision, and incorporating hardware efficiency into generation. The code is available at https://github.com/BonnieW05/KernelBenchX

Efficient GPU kernels are crucial for building performant machine learning architectures, but writing them is a time-consuming challenge that requires significant expertise; therefore, we explore using language models (LMs) to automate kernel generation. We introduce KernelBench, an open-source framework for evaluating LMs' ability to write fast and correct kernels on a suite of 250 carefully selected PyTorch ML workloads. KernelBench represents a real-world engineering environment and making progress on the introduced benchmark directly translates to faster practical kernels. We introduce a new evaluation metric fast_p, which measures the percentage of generated kernels that are functionally correct and offer a speedup greater than an adjustable threshold p over baseline. Our experiments across various state-of-the-art models and test-time methods show that frontier reasoning models perform the best out of the box but still fall short overall, matching the PyTorch baseline in less than 20% of the cases. While we show that results can improve by leveraging execution and profiling feedback during iterative refinement, KernelBench remains a challenging benchmark, with its difficulty increasing as we raise speedup threshold p.

Training Large Language Models (LLMs) efficiently at scale presents a formidable challenge, driven by their ever-increasing computational demands and the need for enhanced performance. In this work, we introduce Liger-Kernel, an open-sourced set of Triton kernels developed specifically for LLM training. With kernel optimization techniques like kernel operation fusing and input chunking, our kernels achieve on average a 20% increase in training throughput and a 60% reduction in GPU memory usage for popular LLMs compared to HuggingFace implementations. In addition, Liger-Kernel is designed with modularity, accessibility, and adaptability in mind, catering to both casual and expert users. Comprehensive benchmarks and integration tests are built in to ensure compatibility, performance, correctness, and convergence across diverse computing environments and model architectures. The source code is available under a permissive license at: github.com/linkedin/Liger-Kernel.

LLM-based agents for GPU kernel generation are advancing rapidly, yet their progress is fundamentally constrained by the benchmarks they optimize against. Existing benchmarks are poorly aligned with production inference frameworks: they evaluate kernels on a single GPU with synthetic inputs, ignore the surrounding compilation stack, and reward replicating known optimizations rather than discovering new ones. The resulting reward signals are misleading: agents learn to generate kernels that score well in sandboxes but introduce interface incompatibilities, compilation-stack conflicts, and silent correctness degradation when integrated into real systems. We introduce FastKernels, a kernel benchmark built around a minimal set of 46 representative architectures spanning 8 categories, whose kernels collectively subsume those of 96.2% (409/425) of HuggingFace Transformers architectures. FastKernels doubles as a minimalistic, production-grade inference framework that runs at parity with hardened systems such as vLLM and SGLang on mainstream LLM serving and substantially exceeds upstream references on under-served architectures; each task's interface mirrors the corresponding module in the state-of-the-art library for its architecture family, enabling direct deployment of optimized kernels into production codebases. Evaluating state-of-the-art kernel agents on FastKernels, we find that even the strongest agent achieves only 0.94times aggregate speedup over production baselines, with weaker agents at 0.78times and 0.53times -- confirming that benchmark-production misalignment is a critical bottleneck for the field. We release FastKernels as a stepping stone toward kernel agents whose benchmark gains translate directly into production throughput improvements. Code is available at https://github.com/Snowflake-AI-Research/fastkernels

In standard Convolutional Neural Networks (CNNs), the receptive fields of artificial neurons in each layer are designed to share the same size. It is well-known in the neuroscience community that the receptive field size of visual cortical neurons are modulated by the stimulus, which has been rarely considered in constructing CNNs. We propose a dynamic selection mechanism in CNNs that allows each neuron to adaptively adjust its receptive field size based on multiple scales of input information. A building block called Selective Kernel (SK) unit is designed, in which multiple branches with different kernel sizes are fused using softmax attention that is guided by the information in these branches. Different attentions on these branches yield different sizes of the effective receptive fields of neurons in the fusion layer. Multiple SK units are stacked to a deep network termed Selective Kernel Networks (SKNets). On the ImageNet and CIFAR benchmarks, we empirically show that SKNet outperforms the existing state-of-the-art architectures with lower model complexity. Detailed analyses show that the neurons in SKNet can capture target objects with different scales, which verifies the capability of neurons for adaptively adjusting their receptive field sizes according to the input. The code and models are available at https://github.com/implus/SKNet.

Developing high-performance GPU kernels is critical for AI and scientific computing, but remains challenging due to its reliance on expert crafting and poor portability. While LLMs offer promise for automation, both general-purpose and finetuned LLMs suffer from two fundamental and conflicting limitations: correctness and efficiency. The key reason is that existing LLM-based approaches directly generate the entire optimized low-level programs, requiring exploration of an extremely vast space encompassing both optimization policies and implementation codes. To address the challenge of exploring an intractable space, we propose Macro Thinking Micro Coding (MTMC), a hierarchical framework inspired by the staged optimization strategy of human experts. It decouples optimization strategy from implementation details, ensuring efficiency through high-level strategy and correctness through low-level implementation. Specifically, Macro Thinking employs reinforcement learning to guide lightweight LLMs in efficiently exploring and learning semantic optimization strategies that maximize hardware utilization. Micro Coding leverages general-purpose LLMs to incrementally implement the stepwise optimization proposals from Macro Thinking, avoiding full-kernel generation errors. Together, they effectively navigate the vast optimization space and intricate implementation details, enabling LLMs for high-performance GPU kernel generation. Comprehensive results on widely adopted benchmarks demonstrate the superior performance of MTMC on GPU kernel generation in both accuracy and running time. On KernelBench, MTMC achieves near 100% and 70% accuracy at Levels 1-2 and 3, over 50% than SOTA general-purpose and domain-finetuned LLMs, with up to 7.3x speedup over LLMs, and 2.2x over expert-optimized PyTorch Eager kernels. On the more challenging TritonBench, MTMC attains up to 59.64% accuracy and 34x speedup.

Achieving a reliable LiDAR-based object detector in autonomous driving is paramount, but its success hinges on obtaining large amounts of precise 3D annotations. Active learning (AL) seeks to mitigate the annotation burden through algorithms that use fewer labels and can attain performance comparable to fully supervised learning. Although AL has shown promise, current approaches prioritize the selection of unlabeled point clouds with high uncertainty and/or diversity, leading to the selection of more instances for labeling and reduced computational efficiency. In this paper, we resort to a novel kernel coding rate maximization (KECOR) strategy which aims to identify the most informative point clouds to acquire labels through the lens of information theory. Greedy search is applied to seek desired point clouds that can maximize the minimal number of bits required to encode the latent features. To determine the uniqueness and informativeness of the selected samples from the model perspective, we construct a proxy network of the 3D detector head and compute the outer product of Jacobians from all proxy layers to form the empirical neural tangent kernel (NTK) matrix. To accommodate both one-stage (i.e., SECOND) and two-stage detectors (i.e., PVRCNN), we further incorporate the classification entropy maximization and well trade-off between detection performance and the total number of bounding boxes selected for annotation. Extensive experiments conducted on two 3D benchmarks and a 2D detection dataset evidence the superiority and versatility of the proposed approach. Our results show that approximately 44% box-level annotation costs and 26% computational time are reduced compared to the state-of-the-art AL method, without compromising detection performance.

The choice of embedding model is a crucial step in the design of Retrieval Augmented Generation (RAG) systems. Given the sheer volume of available options, identifying clusters of similar models streamlines this model selection process. Relying solely on benchmark performance scores only allows for a weak assessment of model similarity. Thus, in this study, we evaluate the similarity of embedding models within the context of RAG systems. Our assessment is two-fold: We use Centered Kernel Alignment to compare embeddings on a pair-wise level. Additionally, as it is especially pertinent to RAG systems, we evaluate the similarity of retrieval results between these models using Jaccard and rank similarity. We compare different families of embedding models, including proprietary ones, across five datasets from the popular Benchmark Information Retrieval (BEIR). Through our experiments we identify clusters of models corresponding to model families, but interestingly, also some inter-family clusters. Furthermore, our analysis of top-k retrieval similarity reveals high-variance at low k values. We also identify possible open-source alternatives to proprietary models, with Mistral exhibiting the highest similarity to OpenAI models.

Benchmarks for LLM-generated GPU kernels decide correctness with a few random inputs and a loose floating-point tolerance, and their verdicts now feed leaderboards and reinforcement-learning rewards. Recent work agrees these checkers are weak and patches them by hand---extra input distributions, fuzzing recipes, tighter tolerances---with no way to measure whether any patch suffices. We introduce mutation analysis as an adequacy metric for kernel-benchmark oracles: deterministic rules inject 10{,}303 compilable faults into verified CUDA implementations of 188 KernelBench problems, 7{,}384 of them with an independent kill witness; any test protocol is scored by the fraction it detects. The official check misses one in six witnessed faults (16.9%), deterministically, and the misses are skewed by family: 8.7% of arithmetic faults escape, but 78.6% of precision faults do. The metric explains why (a tolerance blind band growing with reduction size; a measured ceiling on input aggressiveness set by legitimate floating-point variance), audits the strongest existing patch (KernelBench-Verified's gain splits into +4.0 points from hidden inputs and +4.5 from tighter tolerance, a split its authors could not compute), and exposes a published fuzzing recipe that rejects correct kernels 107 times. Optimizing suites over the kill matrix reaches 98.0% detection with two inputs per problem (94.8% held-out), and the measurement's fault taxonomy teaches a test generator more than the raw faults themselves. Across 48 whole architectures, the blindness grows with scale, concentrating in deep homogeneous pipelines, and two problems prove unrefereeable: their official references violate the benchmark's own tolerance against fp64. We release everything as https://huggingface.co/datasets/Elfsong/KernelBench-M{KernelBench-M}.

The goal of this paper is to revisit Kernel Principal Component Analysis (KPCA) through dualization of a difference of convex functions. This allows to naturally extend KPCA to multiple objective functions and leads to efficient gradient-based algorithms avoiding the expensive SVD of the Gram matrix. Particularly, we consider objective functions that can be written as Moreau envelopes, demonstrating how to promote robustness and sparsity within the same framework. The proposed method is evaluated on synthetic and real-world benchmarks, showing significant speedup in KPCA training time as well as highlighting the benefits in terms of robustness and sparsity.

We present a novel method for reconstructing a 3D implicit surface from a large-scale, sparse, and noisy point cloud. Our approach builds upon the recently introduced Neural Kernel Fields (NKF) representation. It enjoys similar generalization capabilities to NKF, while simultaneously addressing its main limitations: (a) We can scale to large scenes through compactly supported kernel functions, which enable the use of memory-efficient sparse linear solvers. (b) We are robust to noise, through a gradient fitting solve. (c) We minimize training requirements, enabling us to learn from any dataset of dense oriented points, and even mix training data consisting of objects and scenes at different scales. Our method is capable of reconstructing millions of points in a few seconds, and handling very large scenes in an out-of-core fashion. We achieve state-of-the-art results on reconstruction benchmarks consisting of single objects, indoor scenes, and outdoor scenes.

Kernel continual learning by derakhshani2021kernel has recently emerged as a strong continual learner due to its non-parametric ability to tackle task interference and catastrophic forgetting. Unfortunately its success comes at the expense of an explicit memory to store samples from past tasks, which hampers scalability to continual learning settings with a large number of tasks. In this paper, we introduce generative kernel continual learning, which explores and exploits the synergies between generative models and kernels for continual learning. The generative model is able to produce representative samples for kernel learning, which removes the dependence on memory in kernel continual learning. Moreover, as we replay only on the generative model, we avoid task interference while being computationally more efficient compared to previous methods that need replay on the entire model. We further introduce a supervised contrastive regularization, which enables our model to generate even more discriminative samples for better kernel-based classification performance. We conduct extensive experiments on three widely-used continual learning benchmarks that demonstrate the abilities and benefits of our contributions. Most notably, on the challenging SplitCIFAR100 benchmark, with just a simple linear kernel we obtain the same accuracy as kernel continual learning with variational random features for one tenth of the memory, or a 10.1\% accuracy gain for the same memory budget.

Sparse sketches such as the sparse Johnson-Lindenstrauss transform are a core primitive in randomized numerical linear algebra because they leverage random sparsity to reduce the arithmetic cost of sketching, while still offering strong approximation guarantees. Their random sparsity, however, is at odds with efficient implementations on modern GPUs, since it leads to irregular memory access patterns that degrade memory bandwidth utilization. Motivated by this tension, we pursue a sketch-kernel co-design approach: we design a new family of sparse sketches, BlockPerm-SJLT, whose sparsity structure is chosen to enable FlashSketch, a corresponding optimized CUDA kernel that implements these sketches efficiently. The design of BlockPerm-SJLT introduces a tunable parameter that explicitly trades off the tension between GPU-efficiency and sketching robustness. We provide theoretical guarantees for BlockPerm-SJLT under the oblivious subspace embedding (OSE) framework, and also analyze the effect of the tunable parameter on sketching quality. We empirically evaluate FlashSketch on standard RandNLA benchmarks, as well as an end-to-end ML data attribution pipeline called GraSS. FlashSketch pushes the Pareto frontier of sketching quality versus speed, across a range of regimes and tasks, and achieves a global geomean speedup of roughly 1.7x over the prior state-of-the-art GPU sketches.

We evaluate AI-assisted generative capabilities on fundamental numerical kernels in high-performance computing (HPC), including AXPY, GEMV, GEMM, SpMV, Jacobi Stencil, and CG. We test the generated kernel codes for a variety of language-supported programming models, including (1) C++ (e.g., OpenMP [including offload], OpenACC, Kokkos, SyCL, CUDA, and HIP), (2) Fortran (e.g., OpenMP [including offload] and OpenACC), (3) Python (e.g., numba, Numba, cuPy, and pyCUDA), and (4) Julia (e.g., Threads, CUDA.jl, AMDGPU.jl, and KernelAbstractions.jl). We use the GitHub Copilot capabilities powered by OpenAI Codex available in Visual Studio Code as of April 2023 to generate a vast amount of implementations given simple <kernel> + <programming model> + <optional hints> prompt variants. To quantify and compare the results, we propose a proficiency metric around the initial 10 suggestions given for each prompt. Results suggest that the OpenAI Codex outputs for C++ correlate with the adoption and maturity of programming models. For example, OpenMP and CUDA score really high, whereas HIP is still lacking. We found that prompts from either a targeted language such as Fortran or the more general-purpose Python can benefit from adding code keywords, while Julia prompts perform acceptably well for its mature programming models (e.g., Threads and CUDA.jl). We expect for these benchmarks to provide a point of reference for each programming model's community. Overall, understanding the convergence of large language models, AI, and HPC is crucial due to its rapidly evolving nature and how it is redefining human-computer interactions.

To meet the ever-increasing demand for computational efficiency, Neural Processing Units (NPUs) have become critical in modern AI infrastructure. However, unlocking their full potential requires developing high-performance compute kernels using vendor-specific Domain-Specific Languages (DSLs), a task that demands deep hardware expertise and is labor-intensive. While Large Language Models (LLMs) have shown promise in general code generation, they struggle with the strict constraints and scarcity of training data in the NPU domain. Our preliminary study reveals that state-of-the-art general-purpose LLMs fail to generate functional complex kernels for Ascend NPUs, yielding a near-zero success rate. To address these challenges, we propose AscendKernelGen, a generation-evaluation integrated framework for NPU kernel development. We introduce Ascend-CoT, a high-quality dataset incorporating chain-of-thought reasoning derived from real-world kernel implementations, and KernelGen-LM, a domain-adaptive model trained via supervised fine-tuning and reinforcement learning with execution feedback. Furthermore, we design NPUKernelBench, a comprehensive benchmark for assessing compilation, correctness, and performance across varying complexity levels. Experimental results demonstrate that our approach significantly bridges the gap between general LLMs and hardware-specific coding. Specifically, the compilation success rate on complex Level-2 kernels improves from 0% to 95.5% (Pass@10), while functional correctness achieves 64.3% compared to the baseline's complete failure. These results highlight the critical role of domain-specific reasoning and rigorous evaluation in automating accelerator-aware code generation.

The Fourier Neural Operator (FNO) learns solution operators of partial differential equations (PDEs) through Fourier-space kernel parameterization, but frequency truncation can limit the learning of high-frequency variations. AM-FNO and SirenFNO generate kernels for all grid modes from spectral coordinates using shared networks, making coordinate encoding and generator design important. Recent work on implicit neural representations (INRs) has proposed constructing frequency interactions through explicit feature composition rather than relying on subsequent MLPs to form them implicitly. Building on this approach, we propose CAFE+FNO, which incorporates Content-Aware Frequency Encoding+ (CAFE+) into Fourier kernel generation. CAFE+ combines Fourier--Chebyshev features through parallel affine branches and a Hadamard product, forming interactions within and across the two feature families. A kernel MLP maps the resulting representation of each normalized spectral coordinate to a complex channel-mixing matrix. Each layer shares its generator across all stored modes, making the number of trainable parameters independent of the number of modes for a fixed architecture. We compare CAFE+FNO with existing FNO variants on five PDE benchmarks and conduct ablation studies on basis configuration, multiplicative composition, and bandwidth learnability. Code and experimental configurations are available at https://github.com/fabsk101/CAFEPlusFNO.git.

We propose a goodness-of-fit measure for probability densities modeling observations with varying dimensionality, such as text documents of differing lengths or variable-length sequences. The proposed measure is an instance of the kernel Stein discrepancy (KSD), which has been used to construct goodness-of-fit tests for unnormalized densities. The KSD is defined by its Stein operator: current operators used in testing apply to fixed-dimensional spaces. As our main contribution, we extend the KSD to the variable-dimension setting by identifying appropriate Stein operators, and propose a novel KSD goodness-of-fit test. As with the previous variants, the proposed KSD does not require the density to be normalized, allowing the evaluation of a large class of models. Our test is shown to perform well in practice on discrete sequential data benchmarks.

Existing GPU libraries often struggle to fully exploit the parallel resources and on-chip memory (SRAM) of GPUs when chaining multiple GPU functions as individual kernels. While Kernel Fusion (KF) techniques like Horizontal Fusion (HF) and Vertical Fusion (VF) can mitigate this, current library implementations often require library developers to manually create fused kernels. Hence, library users rely on limited sets of pre-compiled or template-based fused kernels. This limits the use cases that can benefit from HF and VF and increases development costs. In order to solve these issues, we present a novel methodology for building GPU libraries that enables automatic on-demand HF and VF for arbitrary combinations of GPU library functions. Our methodology defines reusable, fusionable components that users combine via high-level programming interfaces. Leveraging C++17 metaprogramming features available in compilers like nvcc, our methodology generates a single and optimized fused kernel tailored to the user's specific sequence of operations at compile time, without needing a custom compiler or manual development and pre-compilation of kernel combinations. This approach abstracts low-level GPU complexities while maximizing GPU resource utilization and keeping intermediate data in SRAM. We provide an open-source implementation demonstrating significant speedups compared to traditional libraries in various benchmarks, validating the effectiveness of this methodology for improving GPU performance in the range of 2x to more than 1000x, while preserving high-level programmability.

The automatic generation of deep learning (DL) kernels using large language models (LLMs) has emerged as a promising approach to reduce the manual effort and hardware-specific expertise required for writing high-performance operator implementations. However, existing benchmarks for evaluating LLMs in this domain suffer from limited hardware support, coarse-grained kernel categorization, and imbalanced task coverage. To address these limitations, we introduce MultiKernelBench, the first comprehensive, multi-platform benchmark for LLM-based DL kernel generation. MultiKernelBench spans 285 tasks across 14 well-defined kernel categories and supports three major hardware platforms: Nvidia GPUs, Huawei NPUs, and Google TPUs. To enable future extensibility, we design a modular backend abstraction layer that decouples platform-specific logic from the core benchmarking infrastructure, allowing easy integration of new hardware platforms. We further propose a simple yet effective category-aware one-shot prompting method that improves generation quality by providing in-category exemplars. Through systematic evaluations of seven state-of-the-art LLMs, we reveal significant variation in task difficulty, poor generalization to platforms with less training exposure, and the effectiveness of targeted prompting strategies. MultiKernelBench is publicly available at https://github.com/wzzll123/MultiKernelBench.

Text-attributed graphs (TAGs) are widely used in many real-world domains, and learning on TAGs requires jointly modeling text semantics and graph structure. A standard approach for modeling TAGs is to combine a language model (LM) and a graph neural network (GNN), but joint training is computationally expensive and difficult to scale. Dataset distillation is a promising way to reduce training costs, but existing methods are not well suited to TAGs because they are typically designed for a single modality or still require repeatedly training expensive LM-GNN models on the full dataset during distillation. To address this, we propose TaLK, an effective dataset distillation method for TAGs that couples an LM with a graph-aware neural tangent kernel. This design enables efficient dataset distillation, avoiding repeated joint training on the full dataset while reflecting both textual and structural information for effective TAG learning. Experiments on multiple TAG benchmarks show that TaLK consistently outperforms existing baselines and achieves up to 97% of full-dataset performance with only 1% synthetic data.

The Helmholtz equation governs time-harmonic wave propagation, and in dissipative media a complex modulus renders its squared wavenumber κ^2 complex. Inferring such fields from sparse, noisy data calls for solvers that also quantify their own uncertainty. Physics-informed Gaussian-process (GP) regression supplies this by returning a posterior over the solution, yet operator-conditioned formulations have been developed almost exclusively for real-valued fields. We extend operator-informed GP regression to complex-valued Helmholtz problems by realifying the complex operator into an equivalent coupled real block, which enables inference with standard real-valued GP conditioning. The construction admits a family of priors, from a proper diagonal prior to coregionalized and multiscale variants, and conditions on PDE residuals and boundary traces. On benchmark problems in one to three dimensions, the solver is competitive with finite-difference and neural-network baselines at a far smaller interior-constraint budget. Unlike those deterministic baselines, it returns a posterior over the complex wavefield rather than a point estimate. Applied to in vivo brain magnetic resonance elastography, a proper multiscale prior reconstructs the shear curl field to a correlation of 0.77 with measurement, above a 0.75 target. The gain arises from the multiscale kernel rather than from real--imaginary coupling. We further identify a low-frequency accuracy ceiling set by model mismatch and a posterior uncertainty that is not yet calibrated. Calibrated uncertainty therefore emerges as the central next step for probabilistic wavefield inference in dissipative media.

Recent research on remote sensing object detection has largely focused on improving the representation of oriented bounding boxes but has overlooked the unique prior knowledge presented in remote sensing scenarios. Such prior knowledge can be useful because tiny remote sensing objects may be mistakenly detected without referencing a sufficiently long-range context, and the long-range context required by different types of objects can vary. In this paper, we take these priors into account and propose the Large Selective Kernel Network (LSKNet). LSKNet can dynamically adjust its large spatial receptive field to better model the ranging context of various objects in remote sensing scenarios. To the best of our knowledge, this is the first time that large and selective kernel mechanisms have been explored in the field of remote sensing object detection. Without bells and whistles, LSKNet sets new state-of-the-art scores on standard benchmarks, i.e., HRSC2016 (98.46\% mAP), DOTA-v1.0 (81.85\% mAP) and FAIR1M-v1.0 (47.87\% mAP). Based on a similar technique, we rank 2nd place in 2022 the Greater Bay Area International Algorithm Competition. Code is available at https://github.com/zcablii/Large-Selective-Kernel-Network.

The performance of modern AI systems is fundamentally constrained by the quality of their underlying kernels, which translate high-level algorithmic semantics into low-level hardware operations. Achieving near-optimal kernels requires expert-level understanding of hardware architectures and programming models, making kernel engineering a critical but notoriously time-consuming and non-scalable process. Recent advances in large language models (LLMs) and LLM-based agents have opened new possibilities for automating kernel generation and optimization. LLMs are well-suited to compress expert-level kernel knowledge that is difficult to formalize, while agentic systems further enable scalable optimization by casting kernel development as an iterative, feedback-driven loop. Rapid progress has been made in this area. However, the field remains fragmented, lacking a systematic perspective for LLM-driven kernel generation. This survey addresses this gap by providing a structured overview of existing approaches, spanning LLM-based approaches and agentic optimization workflows, and systematically compiling the datasets and benchmarks that underpin learning and evaluation in this domain. Moreover, key open challenges and future research directions are further outlined, aiming to establish a comprehensive reference for the next generation of automated kernel optimization. To keep track of this field, we maintain an open-source GitHub repository at https://github.com/flagos-ai/awesome-LLM-driven-kernel-generation.

Designing and authoring high-performance custom kernels for accelerators is a complex task that requires deep hardware-level expertise. Large Language Models (LLM) can be leveraged together with real-time compiler feedback to build agentic systems for kernel generation. In this work, we present MaxKernel, a multi-agent system that implements three distinct paradigms for TPU kernel development: (1) a Human-in-the-Loop (HITL) agent for collaborative, step-by-step design; (2) an Autonomous (Auto) agent that executes a fully automated, metric/trace-driven optimization loop; and (3) a Graph-Based Autonomous Search that scales the Auto agent for global exploration of the design space. All three paradigms leverage a shared pool of specialized sub-agents to handle planning, implementation, self-debugging, testing, and hardware profiling. We evaluate MaxKernel on JaxBench, a comprehensive suite of 50 diverse kernel tasks for TPUs, alongside complex, real-world workloads from state-of-the-art open-source models. We demonstrate that MaxKernel consistently generates highly optimized implementations, matching expert hand-tuned baselines and delivering significant performance across the benchmark. Our agent is open-sourced and available https://github.com/AI-Hypercomputer/accelerator-agents/tree/main/MaxKernel.

In this paper, we introduce MK-UNet, a paradigm shift towards ultra-lightweight, multi-kernel U-shaped CNNs tailored for medical image segmentation. Central to MK-UNet is the multi-kernel depth-wise convolution block (MKDC) we design to adeptly process images through multiple kernels, while capturing complex multi-resolution spatial relationships. MK-UNet also emphasizes the images salient features through sophisticated attention mechanisms, including channel, spatial, and grouped gated attention. Our MK-UNet network, with a modest computational footprint of only 0.316M parameters and 0.314G FLOPs, represents not only a remarkably lightweight, but also significantly improved segmentation solution that provides higher accuracy over state-of-the-art (SOTA) methods across six binary medical imaging benchmarks. Specifically, MK-UNet outperforms TransUNet in DICE score with nearly 333times and 123times fewer parameters and FLOPs, respectively. Similarly, when compared against UNeXt, MK-UNet exhibits superior segmentation performance, improving the DICE score up to 6.7% margins while operating with 4.7times fewer #Params. Our MK-UNet also outperforms other recent lightweight networks, such as MedT, CMUNeXt, EGE-UNet, and Rolling-UNet, with much lower computational resources. This leap in performance, coupled with drastic computational gains, positions MK-UNet as an unparalleled solution for real-time, high-fidelity medical diagnostics in resource-limited settings, such as point-of-care devices. Our implementation is available at https://github.com/SLDGroup/MK-UNet.

Recent agentic approaches to LLM-based kernel generation have achieved impressive results on CUDA. For emerging AI accelerators such as AWS Trainium and Inferentia, automated kernel generation and optimization remain largely unaddressed. Writing kernels for these chips via the Neuron Kernel Interface (NKI) is particularly challenging: developers must navigate a multi-engine architecture, tile-based programming, and explicit data movement across multi-level memory hierarchy. Moreover, no publicly-available training data, benchmarks, or tool-augmented agents exist for this domain. We introduce NKI-Agent, the first system combining domain-specific supervised fine-tuning (SFT) with a compile-verify-fix agent loop for NKI kernel generation. We adapt the existing CUDA-Agent framework to Neuron hardware, curate 6,000 NKI kernel generation tasks for training, and construct NKIBench, a 250-task benchmark across three difficulty levels. Evaluated on real Trn1 hardware, NKI-Agent with Claude Opus 4.8 and a rank-aware system prompt achieves a 77.3% pass rate on the 150-task NKIBench. We show that tool use is critical: Opus 4.8 scores 6% in single-shot mode without agent tools. On a 60-task subset, we show that an SFT-trained Qwen3-Coder-30B-A3B achieves 25.0% pass rate at 1/100th the cost, outperforming Claude Sonnet 4 (15.0%). We also report that Group Relative Policy Optimization (GRPO) with binary compilation reward fails to improve over SFT, providing guidance on reward design for RL-based kernel generation.

High-performance GPU kernels are essential to modern machine learning systems, yet automatically generating kernels that are both correct and efficient remains challenging. Existing LLM-based approaches face two major limitations: the scarcity of high-quality training data aligned with the model's current capabilities, and the inherent trade-off between kernel correctness and performance. To address these challenges, we propose KernelZero, a co-evolution framework that continuously improves GPU kernel generation through two specialized models: a Proposer that generates Torch modules from API sets and a Coder that translates them into CUDA or Triton kernels. KernelZero uses a frontier-driven module generation mechanism to continuously produce capability-aligned training modules based on the Coder's current weaknesses. It further introduces Correctness-Aware Group Relative Policy Optimization (CA-GRPO), which optimizes performance only after correctness becomes sufficiently reliable. By alternating the optimization of the Proposer and Coder, KernelZero forms an automatic curriculum that enables targeted and training-efficient capability improvement. Empirically, KernelZero-7B surpasses Claude-4.5-Sonnet on CUDA and DeepSeek-V4-Pro on Triton. On KernelBench Level 1 and 2, it achieves CUDA pass@1 scores of 75.8% and 69.6%, respectively, with pass@10 reaching 100% and 97%. On Triton, it achieves pass@1 scores of 77.2% and 72.5%, respectively.

Open time-series forecasting (TSF) benchmarks cover retail, energy, weather, and traffic, but supply-chain logistics remains underserved. We introduce ISOMORPH, the first public digital twin of a multi-echelon logistics network with fully interpretable, user-configurable parameters and modular topology, demand process, and control rules. The simulator advances a directed routing graph in discrete time: demand arrives at the destination, is served from stock or recorded as backlog, and triggers replenishment through the network. The state vector tracks per-node on-hand inventory with outstanding orders, in-transit shipments, and a smoothed demand estimate, so the dynamics close as a Markov chain on a tractable state space whose transition kernel acts linearly on the empirical distribution of the state. The released data reproduces the bullwhip effect at empirically consistent magnitudes, and three conservation laws encoded in the Markov chain serve as verification tools when users extend the simulator. We release datasets at two catalogue scales (C=50 and C=200) with six scenario sweeps producing 30 additional rollouts and 20 Latin-hypercube perturbations, exhibiting dynamics absent from fixed TSF benchmarks: variance amplification, cascading bottlenecks, regime shifts, and cross-channel coupling through shared macro shocks. Zero-shot evaluation of four foundation models (Chronos, Moirai, TimesFM, Lag-Llama) shows MASE values exceeding public GIFT-Eval references at low-to-moderate horizons, supporting incorporation into existing benchmarks. The same pairing produces forecast confidence bands via Latin-hypercube perturbation of demand-side knobs, forward UQ from parameter uncertainty unavailable on standard TSF datasets, demonstrating that foundation models can serve as fast surrogates for the digital twin's forward UQ. Code (MIT): https://github.com/tuhinsahai/ISOMORPH.

Recent studies have demonstrated the potential of Large Language Models (LLMs) in generating GPU Kernels. Current benchmarks focus on the translation of high-level languages into CUDA, overlooking the more general and challenging task of text-to-CUDA generation. Furthermore, given the hardware-specific and performance-critical features of GPU programming, accurately assessing the performance of LLM-generated GPU programs is nontrivial. In this work, we introduce CUDABench, a comprehensive benchmark designed to evaluate the text-to-CUDA capabilities of LLMs. First, we construct CUDABench-Set, which covers Breadth-Depth-Difficulty evaluation space in diverse application domains, including artificial intelligence, scientific computing, and data analytics, etc. Furthermore, we propose CUDABench-Score and Generative Verification Pipeline that assess (1) compilation correctness, (2) functional consistency through execution-based verification, and (3) a novel roofline-based metric, Performance-Score. Benchmarking state-of-the-art LLMs reveals insightful findings and challenges of text-to-CUDA, such as a notable mismatch between high compilation success rates and low functional correctness, a lack of domain-specific algorithmic knowledge, and suboptimal utilization of GPU hardware resources. Our benchmark is available at https://github.com/CUDA-Bench/CUDABench.

Optimizing GPU kernels presents a significantly greater challenge for large language models (LLMs) than standard code generation tasks, as it requires understanding hardware architecture, parallel optimization strategies, and performance profiling outputs. Most existing LLM-based approaches to kernel generation rely on simple prompting and feedback loops, incorporating hardware awareness only indirectly through profiling feedback. We introduce KernelFoundry, an evolutionary framework that efficiently explores the GPU kernel design space through three key mechanisms: (1) MAP-Elites quality-diversity search with kernel-specific behavioral dimensions to sustain exploration across diverse optimization strategies; (2) meta-prompt evolution, which co-evolves prompts with kernels to uncover task-specific optimization strategies, and (3) template-based parameter optimization to tune kernels to inputs and hardware. We evaluate this framework on KernelBench, robust-kbench, and custom tasks, generating SYCL kernels as a cross-platform GPU programming model and CUDA kernels for comparison to prior work. Our approach consistently outperforms the baseline methods, achieving an average speedup of 2.3x on KernelBench for SYCL. Moreover, KernelFoundry is implemented as a distributed framework with remote access to diverse hardware, enabling rapid benchmarking and featuring a flexible user input layer that supports kernel generation for a wide range of real-world use cases beyond benchmarking.

Recent works show that LLMs can generate kernels with strong performance on server GPUs. Edge deployment presents distinct challenges because the hardware is heterogeneous, the software stacks are fragmented, and the resource budgets are tight. LLM kernel generation across diverse edge backends has yet to be studied systematically. We introduce EdgeKernelBench, which combines a unified IR deployment framework with a hierarchical benchmark for edge workloads. The unified IR captures reusable computation, scheduling, and memory decisions and connects to each target backend through a compiler interface. The benchmark spans progressively larger program scopes, from individual operators to compact model graphs, across representative edge application domains. We instantiate the design with TVM as a reference compiler and validate it across heterogeneous edge backends. With a single generation attempt, the best model achieves 64.5% Correct@1 but only 25.5% [email protected]. This gap shows that functional correctness does not consistently translate into performance gains. We therefore introduce the Layered Edge Kernel Agent (LEKA), which organizes optimization through a layered IR. On the agent evaluation subset, LEKA achieves 43.5% [email protected], compared with 13.0% for direct generation and 26.1% for Claude Code. LEKA and Claude Code use the same base model and optimization budget. Together, EdgeKernelBench and LEKA support unified evaluation and layered optimization of kernels generated by LLMs across edge backends.

Long-horizon reasoning requires an agentic runtime that can persist when evidence supports its current approach and pivot when measurements reveal failure, hidden constraints, or a misspecified objective. We present Argus, a persistent, self-evolving runtime in which Manager, Planner, Engineer, and Reviewer execute bounded missions over durable project state. Argus separates stable user intent from operational objectives, constraints, and verification criteria, and admits memories, skills, procedures, verifiers, routing decisions, and rejected routes only after role-owned review and, when available, task-native verification. Model weights remain fixed; self-evolution occurs through persistent runtime state and control policy, with autonomous execution between operator-owned escalation points. Across seven GPT-5.5 benchmark arenas, Argus achieves about 78% on SWE-Bench Pro versus 59% for Direct Copilot while using 1.41 times the aggregate tokens. After verification-gated self-evolution, mature SWE-Bench waves use 21% fewer solve-input tokens and 15% less active workflow time per task than startup waves, while recording 34 verifier recoveries and 22 strict review-loop rescues. Argus also reaches 76.8% on AARRI-Bench and a 28.0-point gap on mathematical data synthesis, with competitive GPU-kernel and language-model-training results. Beyond benchmarks, an optimized RWKV6 kernel was merged upstream; a multi-day mathematics campaign retained falsified routes and proof-backed frontier updates; and six paper pipelines completed 254 missions with 16 stage rollbacks. These results show that a fixed-weight, self-evolving harness can revise, recover, and accumulate verified approaches while producing structured trajectories for future supervised and reinforcement learning.

Automatically generated code is gaining traction recently, owing to the prevalence of Large Language Models (LLMs). Further, the AlphaProof initiative has demonstrated the possibility of using AI for general mathematical reasoning. Reasoning about computer programs (software) can be accomplished via general mathematical reasoning; however, it tends to be more structured and richer in contexts. This forms an attractive proposition, since then AI agents can be used to reason about voluminous code that gets generated by AI. In this work, we present a first LLM agent, AutoRocq, for conducting program verification. Unlike past works, which rely on extensive training of LLMs on proof examples, our agent learns on-the-fly and improves the proof via an iterative refinement loop. The iterative improvement of the proof is achieved by the proof agent communicating with the Rocq (formerly Coq) theorem prover to get additional context and feedback. The final result of the iteration is a proof derivation checked by the Rocq theorem prover. In this way, our proof construction involves autonomous collaboration between the proof agent and the theorem prover. This autonomy facilitates the search for proofs and decision-making in deciding on the structure of the proof tree. Experimental evaluation on SV-COMP benchmarks and on Linux kernel modules shows promising efficacy in achieving automated program verification. As automation in code generation becomes more widespread, we posit that our proof agent can be potentially integrated with AI coding agents to achieve a generate and validate loop, thus moving closer to the vision of trusted automatic programming.

W4A4 quantization promises full utilization of INT4 Tensor Cores, yet group dequantization overhead on CUDA Cores has driven existing systems to mixed-precision fallbacks. We present the first systematic study of how intra-SM compute balance governs this bottleneck. Through controlled benchmarks across four GPUs from Ampere and Ada architectures, we identify the Tensor Cores to CUDA Cores throughput ratio (ρ) as the primary hardware indicator: the W4A4-g128 kernel yields 2.0--2.5times speedup on RTX~3090 (ρ=16) yet degrades to 0.43--0.47times on A100 (ρ=64) in compute-bond scenarios, establishing W4A4 viability as platform-dependent rather than universally infeasible. Guided by this finding, we build APEX4, which co-designs pure INT4 GEMM kernels with ρ-aware granularity adaptation to mitigate the CUDA Cores dequantization bottleneck. APEX4 achieves perplexity within 0.63 of FP16 on LLaMA-2-70B and outperforms W4Ax Atom-g128 by 4.0\%--4.4\% in zero-shot accuracy. Deployed as a drop-in replacement in unmodified vLLM, it delivers up to 1.66times end-to-end speedup on L40S (ρ=8), and 1.78times on RTX~3090 (ρ=16), 2.09times on A40 (ρ=16), while recovering A100 (ρ=64) to 1.20--1.40times via the mixed-granularity mode. Our code is available at https://github.com/APEX4-W4A4/APEX4-W4A4.

Evaluation has been central to advances in AI, and it is equally critical to autonomous discovery. Yet scaling autonomous discovery to real-world engineering challenges faces a fundamental bottleneck: the cost of evaluating progress. In real settings, a single true evaluation, such as a full benchmark or serving trace, can take hours, so a search can afford only a handful of true evaluations. We present DuoDiscover, a search system that jointly discovers what to optimize and how to evaluate progress efficiently, through three mechanisms. First, each worker in a fleet of coding agents co-discovers an optimization target and a fast, tailored proxy evaluator, which we call a yardstick. The agent then hill-climbs the yardstick rather than the true evaluation. Second, since search can exploit gaps between a yardstick and the true objective, fidelity tests continually recheck each yardstick's ranking and invalidate any that drift. Third, the fleet is bottom-up, with no central decomposition of the problem. A lightweight orchestrator spawns and terminates agents, briefs running ones, and seeds new agents with others' confirmed work. DuoDiscover enables autonomous optimization from software to chip architecture. We demonstrate DuoDiscover on two repository-level benchmarks and four GPU and TPU kernel suites covering hundreds of kernels. On SWE-fficiency, it doubles the average speedup of human experts. On SOL-Exec, it ranks first on 121 of 235 kernels and in the top three on 212. On the heavily optimized vLLM and SQLite engines, DuoDiscover achieves 1.92times and 1.38times gains over the base code. On a CPU microarchitecture optimization task with evaluations of up to 28 hours, DuoDiscover surpasses both AlphaEvolve-based ArchAgent v2 and the best human design, with 1.65times ArchAgent v2's gain in 16.7 days versus more than 40 days, advancing the frontier of autonomous chip design.

Deploying deep learning on microcontrollers (MCUs) requires fitting both the model weights and runtime activations within tens to hundreds of kilobytes of SRAM and Flash. Existing approaches either use an interpreter with a pre-written kernel library or combine a Python code generator with hand-written C kernels. This incurs dispatch overhead and requires framework dependencies. None produces self-contained, dependency-free C code specialized to a given model. In this paper, we present te-comp, the first complete MLIR-based compiler that takes a standard model in .tflite or .safetensors format and emits all C source files needed for deployment: the inference engine (kernels, weight arrays, memory layout) and the RTOS integration layer with zero runtime dependencies. On 10 MCUNet CNN benchmarks, te-comp outperforms MCUNet TinyEngine by using 38% less SRAM (up to 5.9times) and 15% less Flash, while generating complete C code rather than linking a pre-written kernel library. To demonstrate, we use te-comp to compile an 8.3M-parameter GPT-Neo transformer (TinyStories-v2) and deploy it on a single-core Cortex-M7 at 160MHz. The full firmware uses 249KB of 512KB SRAM and 3.62MB of 4MB Flash and achieves approximately 1 token/s interactive text generation via Q4_0 weight quantization, a stateful int4 KV cache, and vocabulary pruning -- a capability no existing MCU inference framework supports.

Optimizing complex systems, ranging from LLM prompts to multi-turn agents, traditionally requires labor-intensive manual iteration. We formalize this challenge as a stochastic generative optimization problem where a generative language model acts as the optimizer, guided by numerical rewards and text feedback to discover the best system. We introduce Prioritized Optimization with Local Contextual Aggregation (POLCA), a scalable framework designed to handle stochasticity in optimization -- such as noisy feedback, sampling minibatches, and stochastic system behaviors -- while effectively managing the unconstrained expansion of solution space. POLCA maintains a priority queue to manage the exploration-exploitation tradeoff, systematically tracking candidate solutions and their evaluation histories. To enhance efficiency, we integrate an varepsilon-Net mechanism to maintain parameter diversity and an LLM Summarizer to perform meta-learning across historical trials. We theoretically prove that POLCA converges to near-optimal candidate solutions under stochasticity. We evaluate our framework on diverse benchmarks, including τ-bench, HotpotQA (agent optimization), VeriBench (code translation) and KernelBench (CUDA kernel generation). Experimental results demonstrate that POLCA achieves robust, sample and time-efficient performance, consistently outperforming state-of-the-art algorithms in both deterministic and stochastic problems. The codebase for this work is publicly available at https://github.com/rlx-lab/POLCA.

The convergence of Information Technology and Operational Technology has exposed Industrial Control Systems (ICS) to multi-stage cyberattacks that traverse software, network, and physical process layers simultaneously. Although Provenance-based Intrusion Detection Systems (PIDS) are effective in Information Technology (IT) environments, their applicability to Industrial Cyber-Physical Systems (CPS) remains largely unexplored because of the absence of datasets that jointly capture host-level causal behavior, industrial network semantics, and physical process state. To address this gap, we design an open-source, Hardware-in-the-Loop (HIL) CPS testbed that replicates an industrial chemical reactor control architecture across the Purdue model layers. Using this testbed, we propose ProvICS, a multimodal provenance dataset purpose-built for CPS intrusion detection, which synchronously captures four streams: whole-system provenance graphs from the supervisory host and the resource-constrained PLC, decoded Modbus deep-packet inspection records, and physical process telemetry. The collection comprises a 48-hour benign phase and a 22-hour attack phase across four campaigns covering 20 ICS ATT&CK techniques over 32 attack events, ranging from reconnaissance to physical process manipulation. Comparative analysis shows that ProvICS is among the few existing ICS/CPS benchmarks with multi-host kernel-level provenance, real PLC hardware-in-the-loop execution, decoded Modbus traffic, physical process-state measurements, and auxiliary raw PCAP traces in a time-synchronized collection. Baseline detection further confirms that cross-modal fusion can detect all 32 labeled attack events (F1 = 0.913, false-positive rate (FPR) = 1.40%), demonstrating the dataset's ability to expose complementary attack signals across modalities and addressing a gap not covered by prior benchmarks.

Brain tumor segmentation models have aided diagnosis in recent years. However, they face MRI complexity and variability challenges, including irregular shapes and unclear boundaries, leading to noise, misclassification, and incomplete segmentation, thereby limiting accuracy. To address these issues, we adhere to an outstanding Convolutional Neural Networks (CNNs) design paradigm and propose a novel network named A4-Unet. In A4-Unet, Deformable Large Kernel Attention (DLKA) is incorporated in the encoder, allowing for improved capture of multi-scale tumors. Swin Spatial Pyramid Pooling (SSPP) with cross-channel attention is employed in a bottleneck further to study long-distance dependencies within images and channel relationships. To enhance accuracy, a Combined Attention Module (CAM) with Discrete Cosine Transform (DCT) orthogonality for channel weighting and convolutional element-wise multiplication is introduced for spatial weighting in the decoder. Attention gates (AG) are added in the skip connection to highlight the foreground while suppressing irrelevant background information. The proposed network is evaluated on three authoritative MRI brain tumor benchmarks and a proprietary dataset, and it achieves a 94.4% Dice score on the BraTS 2020 dataset, thereby establishing multiple new state-of-the-art benchmarks. The code is available here: https://github.com/WendyWAAAAANG/A4-Unet.

Aligned text-image encoders such as CLIP have become the de facto model for vision-language tasks. Furthermore, modality-specific encoders achieve impressive performances in their respective domains. This raises a central question: does an alignment exist between uni-modal vision and language encoders since they fundamentally represent the same physical world? Analyzing the latent spaces structure of vision and language models on image-caption benchmarks using the Centered Kernel Alignment (CKA), we find that the representation spaces of unaligned and aligned encoders are semantically similar. In the absence of statistical similarity in aligned encoders like CLIP, we show that a possible matching of unaligned encoders exists without any training. We frame this as a seeded graph-matching problem exploiting the semantic similarity between graphs and propose two methods - a Fast Quadratic Assignment Problem optimization, and a novel localized CKA metric-based matching/retrieval. We demonstrate the effectiveness of this on several downstream tasks including cross-lingual, cross-domain caption matching and image classification. Code available at github.com/mayug/0-shot-llm-vision.

High-performance GPU kernels are critical to modern machine learning systems, yet developing them remains a manual, expert-driven process. Recent work has explored using LLMs to automate kernel generation, but generated kernels still fall short of carefully tuned references on standardized benchmarks. We present CuTeGen, an agentic GPU kernel synthesis framework that treats kernel development as a structured generate-test-refine workflow over the CuTe abstraction layer. Two design choices distinguish CuTeGen from prior work: targeting CuTe rather than raw CUDA, which exposes performance-critical structures such as tiling and data movement while remaining stable enough for iterative refinement, and a delayed profiling schedule that withholds low-level performance feedback until the kernel's high-level structure has stabilized. On the 209 tasks of KernelBench Level-1 and Level-2, CuTeGen achieves an average speedup of 1.71times over PyTorch and outperforms the prior agentic baseline CudaForge (0.89times) at comparable per-task generation cost. Code available at https://github.com/taratt/cutegen.git

Multimodal agents repeatedly re-examine the same video frames, UI screenshots, and rendered artifacts as their context window slides and reasoning iterates, yet every look-back re-encodes from scratch, because prefix caches serve reuse only at a fixed leading position. We show this recompute is avoidable, and identify exactly what naive KV reuse loses: the cross-chunk conditioning a chunk absorbs from its neighbours. This loss is asymmetric. The direct readout of a cached chunk is recovered exactly and for free by the standard state-merge. What remains is a diffuse, low-rank residue concentrated in deep layers, invisible to single-hop retrieval but precisely what multi-hop reasoning binds on. Blind reuse therefore leaves single-hop recall intact while halving multi-hop accuracy; this is the failure mode prior position-independent caches, designed for single-context or single-image reuse, do not address. We repair it with a small, training-free low-rank conditioning patch stored alongside each position-free chunk. Reuse reduces to one operator across MLA, GQA, and MHA: exact RoPE re-rotation to any target position, plus the patch that restores cross-chunk binding. This makes three window operations cheap: reorder (one patch serves every ordering of a cached set), sliding-window survival (surviving chunks relocate via rotation only, zero re-encode), and recall (an evicted chunk is rehydrated by its patch, never re-encoded). A rank-m patch recovers full task accuracy on cross-chunk-binding benchmarks, MM-NIAH across two attention families and two-page doc-QA, at a fraction of the KV footprint, and reconstructs re-prefill KV to within bf16 rounding in a production SGLang kernel across six backbones. The conditioning signal is strongest in redundant vision and video streams, making our solution most impactful where multimodal agents spend their recompute budget.

Accurate and fast scene understanding is one of the challenging task for autonomous driving, which requires to take full advantage of LiDAR point clouds for semantic segmentation. In this paper, we present a concise and efficient image-based semantic segmentation network, named CENet. In order to improve the descriptive power of learned features and reduce the computational as well as time complexity, our CENet integrates the convolution with larger kernel size instead of MLP, carefully-selected activation functions, and multiple auxiliary segmentation heads with corresponding loss functions into architecture. Quantitative and qualitative experiments conducted on publicly available benchmarks, SemanticKITTI and SemanticPOSS, demonstrate that our pipeline achieves much better mIoU and inference performance compared with state-of-the-art models. The code will be available at https://github.com/huixiancheng/CENet.

Ensembles of independently trained neural networks are a state-of-the-art approach to estimate predictive uncertainty in Deep Learning, and can be interpreted as an approximation of the posterior distribution via a mixture of delta functions. The training of ensembles relies on non-convexity of the loss landscape and random initialization of their individual members, making the resulting posterior approximation uncontrolled. This paper proposes a novel and principled method to tackle this limitation, minimizing an f-divergence between the true posterior and a kernel density estimator (KDE) in a function space. We analyze this objective from a combinatorial point of view, and show that it is submodular with respect to mixture components for any f. Subsequently, we consider the problem of greedy ensemble construction. From the marginal gain on the negative f-divergence, which quantifies an improvement in posterior approximation yielded by adding a new component into the KDE, we derive a novel diversity term for ensemble methods. The performance of our approach is demonstrated on computer vision out-of-distribution detection benchmarks in a range of architectures trained on multiple datasets. The source code of our method is made publicly available at https://github.com/Oulu-IMEDS/greedy_ensembles_training.

In this paper, we revisit the limitations of anchor-based lane detection methods, which have predominantly focused on fixed anchors that stem from the edges of the image, disregarding their versatility and quality. To overcome the inflexibility of anchors, we decompose them into learning the heat map of starting points and their associated directions. This decomposition removes the limitations on the starting point of anchors, making our algorithm adaptable to different lane types in various datasets. To enhance the quality of anchors, we introduce the Large Kernel Attention (LKA) for Feature Pyramid Network (FPN). This significantly increases the receptive field, which is crucial in capturing the sufficient context as lane lines typically run throughout the entire image. We have named our proposed system the Anchor Decomposition Network (ADNet). Additionally, we propose the General Lane IoU (GLIoU) loss, which significantly improves the performance of ADNet in complex scenarios. Experimental results on three widely used lane detection benchmarks, VIL-100, CULane, and TuSimple, demonstrate that our approach outperforms the state-of-the-art methods on VIL-100 and exhibits competitive accuracy on CULane and TuSimple. Code and models will be released on https://github.com/ Sephirex-X/ADNet.

Large Language Models (LLMs) have shown strong capabilities in code generation and reasoning, motivating extensive benchmarks for evaluating functional correctness. However, performance optimization in High-Performance Computing (HPC) poses fundamentally different challenges that are not captured by existing evaluations: HPC performance depends on low-level code, intricate memory access patterns, and computational kernels embedded within sophisticated execution contexts. We introduce HPC-Bench, a performance-grounded benchmark for evaluating LLMs as optimizers of computational kernels in realistic HPC workloads, including 114 workloads across 16 HPC computational motifs. HPC-Bench provides a fully automated, end-to-end evaluation pipeline that combines program-level correctness verification with two correctness-gated metrics, Fast@k and Speedup@k, to characterize reliability and speedup under a fixed sampling budget. Our evaluation of three representative LLMs across serial CPU, OpenMP, and CUDA settings shows that stricter speedup requirements substantially reduce the probability of finding a correct and fast optimization. HPC-Bench is available at https://github.com/Deep-Learning-Profiling-Tools/HPC-Bench.

As agentic AI systems become increasingly capable of generating and optimizing GPU kernels, progress is constrained by benchmarks that reward speedup over software baselines rather than proximity to hardware-efficient execution. We present SOL-ExecBench, a benchmark of 235 CUDA kernel optimization problems extracted from 124 production and emerging AI models spanning language, diffusion, vision, audio, video, and hybrid architectures, targeting NVIDIA Blackwell GPUs. The benchmark covers forward and backward workloads across BF16, FP8, and NVFP4, including kernels whose best performance is expected to rely on Blackwell-specific capabilities. Unlike prior benchmarks that evaluate kernels primarily relative to software implementations, SOL-ExecBench measures performance against analytically derived Speed-of-Light (SOL) bounds computed by SOLAR, our pipeline for deriving hardware-grounded SOL bounds, yielding a fixed target for hardware-efficient optimization. We report a SOL Score that quantifies how much of the gap between a release-defined scoring baseline and the hardware SOL bound a candidate kernel closes. To support robust evaluation of agentic optimizers, we additionally provide a sandboxed harness with GPU clock locking, L2 cache clearing, isolated subprocess execution, and static analysis based checks against common reward-hacking strategies. SOL-ExecBench reframes GPU kernel benchmarking from beating a mutable software baseline to closing the remaining gap to hardware Speed-of-Light.

Benchmarks for LLM-generated GPU kernels (KernelBench, TritonBench, GEAK) score correctness through fixed-shape, small-sample allclose-style checks. The number of inputs varies between benchmarks. The shape, dtype, and tolerance are fixed for each kernel. We test that oracle empirically. We construct a controlled corpus of 24 Triton and CPU stand-in kernels (15 correct controls and 9 LLM-style buggy variants seeded with documented transcription errors) and re-evaluate it under op-schema-aware seeded fuzzing with a high-precision (fp64) CPU reference and per-(op, dtype) absolute tolerances. The seeded oracle flags 9 of 9 buggy kernels and passes 15 of 15 correct controls, at zero precision cost on controls. We extend the corpus to 26 ops (adding a flash-attention pair) and re-run the same protocol on five GPU classes (RTX 3060, A10, L40S, A100 SXM4, H100 NVL). The verdicts are identical across all five GPUs: 10 of 10 illusions caught and 16 of 16 controls clean. The corpus result is about LLM-style transcription bugs that the allclose-on-one-shape oracle certifies as correct, not about the bug rate of any specific deployed LLM. Every flagged failure replays byte-for-byte from a stored seed.

We present Metal-Sci, a 10-task benchmark of scientific Apple Silicon Metal compute kernels spanning six optimization regimes (stencils, all-pairs in n-body problems, multi-field Boltzmann, neighbor-list molecular dynamics, multi-kernel PDE, FFT). Each task ships a CPU reference, a roofline-anchored fitness function, and a held-out generalization size. We pair the benchmark with a lightweight harness for automatic kernel search that runtime-compiles each candidate, scores it against the roofline across multiple sizes, and feeds structured compile and per-size correctness diagnostics back to a frozen LLM driving a (1{+}1) evolutionary loop. We report matched single-model sweeps of Claude Opus 4.7, Gemini 3.1 Pro, and GPT 5.5 on M1 Pro: in-distribution self-speedups span 1.00times to 10.7times. Beyond raw speedup, our central methodological claim is structural: the held-out gate scoring function Φ_T (evaluated once at end-of-run on a configuration the agent never sees during search) functions as a cheap mechanical oversight primitive on this automatic search loop, catching e.g. an Opus template <uint D> HMC win that returns wrong samples at unseen dimensions, and a GPT FFT3D best that wins in-distribution at 2.95times speedup but collapses to 0.23times on a 256^3 held-out cube, a silent regression that the in-distribution score alone cannot see. Code at https://github.com/vicgalle/metal-sci-kernels

Large Language Models (LLMs) have propelled groundbreaking advancements across several domains and are commonly used for text generation applications. However, the computational demands of these complex models pose significant challenges, requiring efficient hardware acceleration. Benchmarking the performance of LLMs across diverse hardware platforms is crucial to understanding their scalability and throughput characteristics. We introduce LLM-Inference-Bench, a comprehensive benchmarking suite to evaluate the hardware inference performance of LLMs. We thoroughly analyze diverse hardware platforms, including GPUs from Nvidia and AMD and specialized AI accelerators, Intel Habana and SambaNova. Our evaluation includes several LLM inference frameworks and models from LLaMA, Mistral, and Qwen families with 7B and 70B parameters. Our benchmarking results reveal the strengths and limitations of various models, hardware platforms, and inference frameworks. We provide an interactive dashboard to help identify configurations for optimal performance for a given hardware platform.

Large language models (LLMs) have demonstrated remarkable capabilities in reasoning and code generation, raising the prospect that they could assist in developing and optimizing the very infrastructure that powers them. However, existing benchmarks mainly focus on isolated kernels, predefined operators, or pre-specified optimization targets, and therefore fail to evaluate the ability of LLMs to perform open-ended, long-horizon LLM infrastructure engineering. To address this gap, we present Φ-Bench, a benchmark for systematically evaluating LLMs on engineering the LLM infrastructure stack. Derived from optimization problems studied in frontier research and grounded in real-world code repositories, Φ-Bench provides broad coverage of the LLM infrastructure stack and spans tasks of varying complexity, ranging from localized kernel-level function completion to long-horizon implementation and end-to-end system optimization. Extensive experiments on frontier LLMs reveal their current capabilities and limitations in engineering complex LLM infrastructure, offering insights into the challenges that remain on the path toward autonomous optimization of future AI infrastructure.

We introduce PTXBench, a benchmark for evaluating and adapting large language models (LLMs) to use architecture-specific PTX for GPU kernel optimization. PTXBench measures functional correctness, whether selected target instructions execute at runtime, and speedup over frontier libraries across GEMM and attention workloads on H100 and B200 GPUs. Our evaluation shows that architecture-specific PTX capability remains uneven: success rates fall substantially on complex attention backward workloads, and executing the target instructions does not necessarily translate into competitive performance. No evaluated model consistently matches frontier libraries across the suite. We further adapt Qwen3.6-27B using supervised fine-tuning. Repair-conditioned training improves several tasks, but generalization remains uneven; data coverage, balance, and the quality of the reasoning teacher matter in addition to dataset size. PTXBench provides an auditable testbed for measuring and improving LLMs' ability to exploit evolving GPU architectures.

AMD GPUs offer state-of-the-art compute and memory bandwidth; however, peak performance AMD kernels are written in raw assembly. To address the difficulty of mapping AI algorithms to hardware, recent work proposes C++ embedded and PyTorch-inspired domain-specific languages like ThunderKittens (TK) to simplify high performance AI kernel development on NVIDIA hardware. We explore the extent to which such primitives -- for explicit tile-based programming with optimized memory accesses and fine-grained asynchronous execution across workers -- are NVIDIA-specific or general. We provide the first detailed study of the programming primitives that lead to performant AMD AI kernels, and we encapsulate these insights in the HipKittens (HK) programming framework. We find that tile-based abstractions used in prior DSLs generalize to AMD GPUs, however we need to rethink the algorithms that instantiate these abstractions for AMD. We validate the HK primitives across CDNA3 and CDNA4 AMD platforms. In evaluations, HK kernels compete with AMD's hand-optimized assembly kernels for GEMMs and attention, and consistently outperform compiler baselines. Moreover, assembly is difficult to scale to the breadth of AI workloads; reflecting this, in some settings HK outperforms all available kernel baselines by 1.2-2.4times (e.g., d=64 attention, GQA backwards, memory-bound kernels). These findings help pave the way for a single, tile-based software layer for high-performance AI kernels that translates across GPU vendors. HipKittens is released at: https://github.com/HazyResearch/HipKittens.

Large language model (LLM)-based inference workloads increasingly dominate data center costs and resource utilization. Therefore, understanding the inference workload characteristics on evolving CPU-GPU coupled architectures is crucial for optimization. This paper presents an in-depth analysis of LLM inference behavior on loosely-coupled (PCIe A100/H100) and closely-coupled (GH200) systems. We analyze performance dynamics using fine-grained operator-to-kernel trace analysis, facilitated by our novel profiler SKIP and metrics like Total Kernel Launch and Queuing Time (TKLQT). Results show that closely-coupled (CC) GH200 significantly outperforms loosely-coupled (LC) systems at large batch sizes, achieving 1.9x-2.7x faster prefill latency for Llama 3.2-1B. However, our analysis also reveals that GH200 remains CPU-bound up to 4x larger batch sizes than LC systems. In this extended CPU-bound region, we identify the performance characteristics of the Grace CPU as a key factor contributing to higher inference latency at low batch sizes on GH200. We demonstrate that TKLQT accurately identifies this CPU/GPU-bound transition point. Based on this analysis, we further show that kernel fusion offers significant potential to mitigate GH200's low-batch latency bottleneck by reducing kernel launch overhead. This detailed kernel-level characterization provides critical insights for optimizing diverse CPU-GPU coupling strategies. This work is an initial effort, and we plan to explore other major AI/DL workloads that demand different degrees of CPU-GPU heterogeneous architectures.

Writing high-performance GPU kernels is among the most labor-intensive tasks in machine learning systems engineering. We present AutoKernel, an open-source framework that applies an autonomous agent loop to GPU kernel optimization for arbitrary PyTorch models. Given a model, AutoKernel profiles it to identify computational bottlenecks, ranks them by Amdahl's law impact, and iteratively refines Triton or CUDA C++ kernel implementations through hundreds of experiments without human intervention. A five-stage correctness harness covering smoke tests, shape sweeps, numerical stability, determinism verification, and edge-case coverage ensures every candidate kernel is validated before any speedup is recorded. The system comprises over 9,000 lines of Python, 18 starter kernel implementations across two backends, a six-tier optimization playbook, and integration with the KernelBench benchmark suite. AutoKernel covers nine kernel types spanning the dominant operations in modern transformer architectures. On an NVIDIA H100, our Triton kernels outperform both PyTorch eager and torch.compile (max-autotune) on the majority of tested configurations: 5.29x over eager on RMSNorm, 2.82x on softmax, and 2.21x on cross-entropy, while beating torch.compile by 2.83x, 3.44x, and 2.94x respectively. In community deployment, an AutoKernel-optimized kernel achieved first place on the vectorsum_v2 B200 leaderboard. The full system is available at https://github.com/RightNow-AI/autokernel.

Deep learning inference and training performance depends critically on GPU kernel efficiency. Modern compilers such as PyTorch Inductor automatically generate GPU kernels from high-level model code, but frequently underperform expert-written implementations by wide margins. Recent LLM-assisted kernel optimizers can close this gap for standalone kernels, yet treat compiled models as black boxes, generally optimizing individual standalone kernels without respecting the compiler's structural decisions or verifying the model end-to-end. We present KernelOPT, a multi-agent system that treats compiled models as structured artifacts. It preserves vendor library calls (cuBLAS, cuDNN) and exclusively targets generated Triton sub-kernels using five profiling-guided LLM agents. A four-gate verification cascade applies static validation, multi-seed correctness checking, model-level float64-fallback verification, and performance gating (γ{=}1.03) to filter candidates and verify the re-stitched model end-to-end. When candidates fail verification, the system preserves the compiler baseline. The system accepts PyTorch nn Modules, standalone Triton kernels, and Helion kernels. Evaluated on 250 KernelBench problems (100 Level 1, 100 Level 2 and 50 Level 3) on NVIDIA H200, KernelOPT achieves geometric mean speedups over torch compile of 1.40times (L1), 1.15times (L2), and 1.07times (L3) across all kernels, including fallback cases. Optimized-only geomeans (excluding cases where verification gates preserve the compiler baseline) are substantially higher: 2.54times (L1: 36/100), 1.84times (L2: 23/100), and 1.37times (L3: 11/50), reflecting where the optimizer achieves meaningful leverage.

The challenge of mapping AI architectures to GPU hardware is creating a critical bottleneck in AI progress. Despite substantial efforts, hand-written custom kernels fail to meet their theoretical performance thresholds, even on well-established operations like linear attention. The diverse hardware capabilities of GPUs might suggest that we need a wide variety of techniques to achieve high performance. However, our work explores whether a small number of key abstractions can drastically simplify the process. We present ThunderKittens (TK), a framework for writing performant AI kernels while remaining easy to use and maintain. Our abstractions map to the three levels of the GPU hierarchy: (1) at the warp-level, we provide 16x16 matrix tiles as basic data structures and PyTorch-like parallel compute operations over tiles, (2) at the thread-block level, we provide a template for overlapping asynchronous operations across parallel warps, and (3) at the grid-level, we provide support to help hide the block launch and tear-down, and memory costs. We show the value of TK by providing kernels that match or outperform prior kernels for a range of AI operations. We match CuBLAS and FlashAttention-3 on GEMM and attention inference performance and outperform the strongest baselines by 10-40% on attention backwards, 8times on state space models, and 14times on linear attention.

Optimizing GPU kernels manually is a challenging and time-consuming task. With the rapid development of LLMs, automated GPU kernel optimization is gradually becoming a tangible reality. However, current LLM-driven automated optimization methods narrowly focus on machine learning applications, such as PyTorch operator optimization, while overlooking broader domains like sparse matrix operations in scientific computing. Extending to these broader applications brings new challenges for the benchmark and algorithm. Therefore, developing a general-purpose automated kernel optimization method becomes our primary focus. In this paper, we address the absence of systematic evaluation for multi-scenario settings by introducing MSKernelBench, which spans multiple scenarios, including fundamental algebraic operations, common LLM kernels, sparse matrix operators, and scientific computing routines, each supporting both FP32 and BF16 precision. Building on this benchmark, we introduce CUDAMaster, a multi-agent, hardware-aware system for kernel optimization that leverages profiling information and automatically constructs the full compilation and execution toolchain. Experimental results demonstrate that CUDAMaster achieves significant speedups across most operators, outperforming Astra by about 35%. In several cases, its performance matches or surpasses that of highly optimized, closed-source libraries such as cuBLAS. A demo showcasing the original and optimized code for each operator is available at https://hanyx2021.github.io/MSKernelBenchDemo/.

Improving GPU kernel efficiency is crucial for advancing AI systems. Recent work has explored leveraging large language models (LLMs) for GPU kernel generation and optimization. However, existing LLM-based kernel optimization pipelines typically rely on opaque, implicitly learned heuristics within the LLMs to determine optimization strategies. This leads to inefficient trial-and-error and weakly interpretable optimizations. Our key insight is to replace implicit heuristics with expert optimization skills that are knowledge-driven and aware of task trajectories. Specifically, we present KernelSkill, a multi-agent framework with a dual-level memory architecture. KernelSkill operates by coordinating agents with long-term memory of reusable expert skills and short-term memory to prevent repetitive backtracking. On KernelBench Levels 1-3, KernelSkill achieves a 100% success rate and average speedups of 5.44x, 2.82x, and 1.92x over Torch Eager on Levels 1, 2, and 3, respectively, outperforming prior baselines. Code is available at https://github.com/0satan0/KernelMem/.

The increasing versatility of language models LMs has given rise to a new class of benchmarks that comprehensively assess a broad range of capabilities. Such benchmarks are associated with massive computational costs reaching thousands of GPU hours per model. However the efficiency aspect of these evaluation efforts had raised little discussion in the literature. In this work we present the problem of Efficient Benchmarking namely intelligently reducing the computation costs of LM evaluation without compromising reliability. Using the HELM benchmark as a test case we investigate how different benchmark design choices affect the computation-reliability tradeoff. We propose to evaluate the reliability of such decisions by using a new measure Decision Impact on Reliability DIoR for short. We find for example that the current leader on HELM may change by merely removing a low-ranked model from the benchmark and observe that a handful of examples suffice to obtain the correct benchmark ranking. Conversely a slightly different choice of HELM scenarios varies ranking widely. Based on our findings we outline a set of concrete recommendations for more efficient benchmark design and utilization practices leading to dramatic cost savings with minimal loss of benchmark reliability often reducing computation by x100 or more.

Due to the high computational demands executing a rigorous comparison between hyperparameter optimization (HPO) methods is often cumbersome. The goal of this paper is to facilitate a better empirical evaluation of HPO methods by providing benchmarks that are cheap to evaluate, but still represent realistic use cases. We believe these benchmarks provide an easy and efficient way to conduct reproducible experiments for neural hyperparameter search. Our benchmarks consist of a large grid of configurations of a feed forward neural network on four different regression datasets including architectural hyperparameters and hyperparameters concerning the training pipeline. Based on this data, we performed an in-depth analysis to gain a better understanding of the properties of the optimization problem, as well as of the importance of different types of hyperparameters. Second, we exhaustively compared various different state-of-the-art methods from the hyperparameter optimization literature on these benchmarks in terms of performance and robustness.

Existing benchmarks for hardware design primarily evaluate Large Language Models (LLMs) on isolated, component-level tasks such as generating HDL modules from specifications, leaving repository-scale evaluation unaddressed. We introduce HWE-Bench, the first large-scale, repository-level benchmark for evaluating LLM agents on real-world hardware bug repair tasks. HWE-Bench comprises 417 task instances derived from real historical bug-fix pull requests across six major open-source projects spanning both Verilog/SystemVerilog and Chisel, covering RISC-V cores, SoCs, and security roots-of-trust. Each task is grounded in a fully containerized environment where the agent must resolve a real bug report, with correctness validated through the project's native simulation and regression flows. The benchmark is built through a largely automated pipeline that enables efficient expansion to new repositories. We evaluate seven LLMs with four agent frameworks and find that the best agent resolves 70.7% of tasks overall, with performance exceeding 90% on smaller cores but dropping below 65% on complex SoC-level projects. We observe larger performance gaps across models than commonly reported on software benchmarks, and difficulty is driven by project scope and bug-type distribution rather than code size alone. Our failure analysis traces agent failures to three stages of the debugging process: fault localization, hardware-semantic reasoning, and cross-artifact coordination across RTL, configuration, and verification components, providing concrete directions for developing more capable hardware-aware agents.

As machine learning (ML) is increasingly implemented in hardware to address real-time challenges in scientific applications, the development of advanced toolchains has significantly reduced the time required to iterate on various designs. These advancements have solved major obstacles, but also exposed new challenges. For example, processes that were not previously considered bottlenecks, such as hardware synthesis, are becoming limiting factors in the rapid iteration of designs. To mitigate these emerging constraints, multiple efforts have been undertaken to develop an ML-based surrogate model that estimates resource usage of ML accelerator architectures. We introduce wa-hls4ml, a benchmark for ML accelerator resource and latency estimation, and its corresponding initial dataset of over 680,000 fully connected and convolutional neural networks, all synthesized using hls4ml and targeting Xilinx FPGAs. The benchmark evaluates the performance of resource and latency predictors against several common ML model architectures, primarily originating from scientific domains, as exemplar models, and the average performance across a subset of the dataset. Additionally, we introduce GNN- and transformer-based surrogate models that predict latency and resources for ML accelerators. We present the architecture and performance of the models and find that the models generally predict latency and resources for the 75% percentile within several percent of the synthesized resources on the synthetic test dataset.

The recent shift in Generative AI (GenAI) applications from cloud-only environments to end-user devices introduces new challenges in resource management, system efficiency, and user experience. This paper presents ConsumerBench, a comprehensive benchmarking framework designed to evaluate the system efficiency and response time of GenAI models running on end-user devices. Unlike existing benchmarks that assume exclusive model access on dedicated GPUs, ConsumerBench simulates realistic multi-application scenarios executing concurrently on constrained hardware. Furthermore, ConsumerBench supports customizable workflows that simulate complex tasks requiring coordination among multiple applications. ConsumerBench captures both application-level metrics, including latency and Service Level Objective (SLO) attainment, and system-level metrics like CPU/GPU utilization and memory bandwidth. Through extensive experiments, ConsumerBench reveals inefficiencies in resource sharing, unfair scheduling under greedy allocation, and performance pitfalls of static model server configurations. The paper also provides practical insights for model developers and system designers, highlighting the benefits of custom kernels tailored to consumer-grade GPU architectures and the value of implementing SLO-aware scheduling strategies.

Existing benchmarks have proven effective for assessing the performance of fully trained large language models. However, we find striking differences in the early training stages of small models, where benchmarks often fail to provide meaningful or discriminative signals. To explore how these differences arise, this competition tackles the challenge of designing scientific knowledge evaluation tasks specifically tailored for measuring early training progress of language models. Participants are invited to develop novel evaluation methodologies or adapt existing benchmarks to better capture performance differences among language models. To support this effort, we provide three pre-trained small models (0.5B, 1B, and 3B parameters), along with intermediate checkpoints sampled during training up to 200B tokens. All experiments and development work can be run on widely available free cloud-based GPU platforms, making participation accessible to researchers with limited computational resources. Submissions will be evaluated based on three criteria: the quality of the performance signal they produce, the consistency of model rankings at 1 trillion tokens of training, and their relevance to the scientific knowledge domain. By promoting the design of tailored evaluation strategies for early training, this competition aims to attract a broad range of participants from various disciplines, including those who may not be machine learning experts or have access to dedicated GPU resources. Ultimately, this initiative seeks to make foundational LLM research more systematic and benchmark-informed from the earliest phases of model development.

GPU kernel generation by LLMs has recently experienced rapid development, leveraging test-time scaling and reinforcement learning techniques. However, a key challenge for kernel generation is the scarcity of high-quality data, as most high-quality kernels are proprietary and not open-source. This challenge prevents us from leveraging supervised fine-tuning to align LLMs to the kernel generation task. To address this challenge, we develop a pipeline that generates and curates high-quality CUDA kernels with reasoning traces, motivated by a critical observation that concise yet informative reasoning traces result in robust generation of high-performance kernels. Using this pipeline, we construct our dataset ConCuR and introduce our model KernelCoder, which is the first model trained on a curated dataset consisting of PyTorch, reasoning, and CUDA kernel pairs, to our knowledge. In the KernelBench setup, our model achieves significant improvements over the existing top-performing model, QwQ-32B, and outperforms all open-source models fine-tuned for kernel generation, as well as frontier models such as DeepSeek-V3.1-Think and Claude-4-sonnet. Finally, we show that the average reasoning length can serve as a metric to assess the difficulty of kernel generation tasks. The observations, metrics, and our data collection and curation pipeline can help obtain better data in the kernel generation task in the future.

Standardized benchmarks drive progress in machine learning. However, with repeated testing, the risk of overfitting grows as algorithms over-exploit benchmark idiosyncrasies. In our work, we seek to mitigate this challenge by compiling ever-expanding large-scale benchmarks called Lifelong Benchmarks. As exemplars of our approach, we create Lifelong-CIFAR10 and Lifelong-ImageNet, containing (for now) 1.69M and 1.98M test samples, respectively. While reducing overfitting, lifelong benchmarks introduce a key challenge: the high cost of evaluating a growing number of models across an ever-expanding sample set. To address this challenge, we also introduce an efficient evaluation framework: Sort \& Search (S&S), which reuses previously evaluated models by leveraging dynamic programming algorithms to selectively rank and sub-select test samples, enabling cost-effective lifelong benchmarking. Extensive empirical evaluations across 31,000 models demonstrate that S&S achieves highly-efficient approximate accuracy measurement, reducing compute cost from 180 GPU days to 5 GPU hours (1000x reduction) on a single A100 GPU, with low approximation error. As such, lifelong benchmarks offer a robust, practical solution to the "benchmark exhaustion" problem.

High quality kernels are critical for reducing training and inference costs of Large Language Models (LLMs), yet they traditionally require significant expertise in hardware architecture and software optimization. While recent advances in LLM-based code generation show promise for complex optimization, existing methods struggle with the vast optimization space due to insufficient hardware domain knowledge, failing to effectively balance exploration and exploitation. We present KernelBand, a novel framework that formulates kernel optimization as a hierarchical multi-armed bandit problem, enabling LLM agents to strategically navigate the optimization space by treating kernel selection and optimization strategy application as sequential decision-making processes. Our approach leverages hardware profiling information to identify promising optimization strategies and employs runtime behavior clustering to reduce exploration overhead across kernel candidates. Extensive experiments on TritonBench demonstrate that KernelBand significantly outperforms state-of-the-art methods, achieving superior performance with fewer tokens while exhibiting consistent improvement without saturation as computational resources increase.

We introduce AInsteinBench, a large-scale benchmark for evaluating whether large language model (LLM) agents can operate as scientific computing development agents within real research software ecosystems. Unlike existing scientific reasoning benchmarks which focus on conceptual knowledge, or software engineering benchmarks that emphasize generic feature implementation and issue resolving, AInsteinBench evaluates models in end-to-end scientific development settings grounded in production-grade scientific repositories. The benchmark consists of tasks derived from maintainer-authored pull requests across six widely used scientific codebases, spanning quantum chemistry, quantum computing, molecular dynamics, numerical relativity, fluid dynamics, and cheminformatics. All benchmark tasks are carefully curated through multi-stage filtering and expert review to ensure scientific challenge, adequate test coverage, and well-calibrated difficulty. By leveraging evaluation in executable environments, scientifically meaningful failure modes, and test-driven verification, AInsteinBench measures a model's ability to move beyond surface-level code generation toward the core competencies required for computational scientific research.

AI systems can now write and optimize production GPU kernels, but validating them remains an important challenge. Evaluating the kernel on a few random inputs and checking that its outputs match a trusted reference kernel within numeric tolerances is not sufficient: races can cause nondeterministic behavior that fails to manifest in tests, and numeric tolerances can hide bugs and cause false positives even after extensive calibration. To address this challenge, we present RESOLVE, which combines testing and formal verification to build a comprehensive kernel validation pipeline. It operates in three steps: First, it tests for nondeterminism using binary instrumentation that perturbs execution timing to expose races. Second, an agent rewrites the candidate and reference kernels to obtain "reduced-concurrency" versions that are simpler to analyze but still produce bitwise-identical outputs in all tests. Third, the reduced kernels are formally analyzed in the F*/Pulse framework and prove that they perform the same computation on real numbers. This sidesteps the need for numeric tolerances. We show that RESOLVE can validate a broad selection of kernels using KernelBench, and prove equivalence across fused GEMMs in three state-of-the-art frameworks and languages: CUTLASS, Triton, and Gluon. It also analyzes mega-kernels, notoriously difficult to validate, and finds four previously unreported issues, including two clear bugs. We show that agents can use RESOLVE to repair the issues, with minimal performance impact, highlighting that agents can optimize aggressively when they can rigorously check their results.

We introduce CASS, the first large-scale dataset and model suite for cross-architecture GPU code transpilation, targeting both source-level (CUDA leftrightarrow HIP) and assembly-level (Nvidia SASS leftrightarrow AMD RDNA3) translation. The dataset comprises 70k verified code pairs across host and device, addressing a critical gap in low-level GPU code portability. Leveraging this resource, we train the CASS family of domain-specific language models, achieving 95% source translation accuracy and 37.5% assembly translation accuracy, substantially outperforming commercial baselines such as GPT-4o, Claude, and Hipify. Our generated code matches native performance in over 85% of test cases, preserving runtime and memory behavior. To support rigorous evaluation, we introduce CASS-Bench, a curated benchmark spanning 16 GPU domains with ground-truth execution. All data, models, and evaluation tools are released as open source to foster progress in GPU compiler tooling, binary compatibility, and LLM-guided hardware translation. Dataset and benchmark are on https://huggingface.co/datasets/MBZUAI/cass{blue{HuggingFace}}, with code at https://github.com/GustavoStahl/CASS{blue{GitHub}}.

Large language models (LLMs) are powerful tools capable of handling diverse tasks. Comparing and selecting appropriate LLMs for specific tasks requires systematic evaluation methods, as models exhibit varying capabilities across different domains. However, finding suitable benchmarks is difficult given the many available options. This complexity not only increases the risk of benchmark misuse and misinterpretation but also demands substantial effort from LLM users, seeking the most suitable benchmarks for their specific needs. To address these issues, we introduce BenchmarkCards, an intuitive and validated documentation framework that standardizes critical benchmark attributes such as objectives, methodologies, data sources, and limitations. Through user studies involving benchmark creators and users, we show that BenchmarkCards can simplify benchmark selection and enhance transparency, facilitating informed decision-making in evaluating LLMs. Data & Code: https://github.com/SokolAnn/BenchmarkCards

We investigate large language model performance across five orders of magnitude of compute scaling in eleven recent model architectures. We show that average benchmark performance, aggregating over many individual tasks and evaluations as in the commonly-used BIG-Bench dataset, is decently predictable as a function of training compute scale. Specifically, when extrapolating BIG-Bench Hard performance across one order of magnitude in compute, we observe average absolute errors of 6 percentage points (pp). By contrast, extrapolation for individual BIG-Bench tasks across an order of magnitude in compute yields higher average errors of 18pp. Nonetheless, individual task performance remains significantly more predictable than chance. Overall, our work suggests compute scaling provides a promising basis to forecast AI capabilities in diverse benchmarks, though predicting performance in specific tasks poses challenges.

Training algorithms, broadly construed, are an essential part of every deep learning pipeline. Training algorithm improvements that speed up training across a wide variety of workloads (e.g., better update rules, tuning protocols, learning rate schedules, or data selection schemes) could save time, save computational resources, and lead to better, more accurate, models. Unfortunately, as a community, we are currently unable to reliably identify training algorithm improvements, or even determine the state-of-the-art training algorithm. In this work, using concrete experiments, we argue that real progress in speeding up training requires new benchmarks that resolve three basic challenges faced by empirical comparisons of training algorithms: (1) how to decide when training is complete and precisely measure training time, (2) how to handle the sensitivity of measurements to exact workload details, and (3) how to fairly compare algorithms that require hyperparameter tuning. In order to address these challenges, we introduce a new, competitive, time-to-result benchmark using multiple workloads running on fixed hardware, the AlgoPerf: Training Algorithms benchmark. Our benchmark includes a set of workload variants that make it possible to detect benchmark submissions that are more robust to workload changes than current widely-used methods. Finally, we evaluate baseline submissions constructed using various optimizers that represent current practice, as well as other optimizers that have recently received attention in the literature. These baseline results collectively demonstrate the feasibility of our benchmark, show that non-trivial gaps between methods exist, and set a provisional state-of-the-art for future benchmark submissions to try and surpass.

Jupyter notebooks are widely used for machine learning (ML) prototyping. Yet few debugging tools are designed for ML code in notebooks, potentially due to the lack of benchmarks. We introduce JunoBench, the first benchmark dataset of real-world crashes in Python-based ML notebooks. JunoBench has 111 curated and reproducible crashes from public Kaggle notebooks, each paired with a verifiable fix, ranging over popular ML libraries, including TensorFlow/Keras, PyTorch, Scikit-learn, Pandas, and NumPy, as well as notebook-specific out-of-order execution issue. To support reproducibility and ease of use, JunoBench offers a unified execution environment where crashes and fixes can be reliably reproduced. By providing realistic crashes and their resolutions, JunoBench facilitates bug detection, localization, and repair tailored to the interactive and iterative nature of notebook-based ML development.

Recent progress in machine learning is driven by large-scale foundation models, where scaling laws and finding optimal scaling prescriptions for architecture, data, and hyperparameters are key in advancing the state-of-the-art. Therefore, it is surprising that no systematic study evaluates the methodology to obtain scaling laws and prescriptions across different model types. To shed light on this crucial blind spot and facilitate future research, we introduce the surrogate benchmarks ScAn-Bench-LLM and ScAn-Bench-VLM based on 4524 and 8024 checkpoints of language and vision-language model pipelines. On our benchmarks, we perform the first systematic evaluation of both data acquisition and extrapolation methodology for scaling analysis across different data modalities.

New AI accelerators with novel instruction set architectures (ISAs) often require developers to manually craft low-level kernels -- a time-consuming, laborious, and error-prone process that cannot scale across diverse hardware targets. This prevents emerging hardware platforms from reaching the market efficiently. While prior LLM-based code generation has shown promise in mature GPU ecosystems, it remains unclear whether agentic LLM systems can quickly produce valid and efficient kernels for emerging hardware with new ISAs. We present KernelCraft: the first benchmark to evaluate an LLM agent's ability to generate and optimize low-level kernels for customized accelerators via a function-calling, feedback-driven workflow. Within KernelCraft, the agent refines kernels under ISA and hardware constraints using automated feedback derived from compilation checks, simulation, and correctness validation against ground truth. In our experiments, we assess agent performance across three emerging accelerator platforms on more than 20 ML tasks, each with 5 diverse task configurations, with special evaluation of task configuration complexity. Across four leading reasoning models, top agents produce functionally valid kernels for previously unseen ISAs within a few refinement steps, with optimized kernels that match or outperform template-based compiler baselines. With that, we demonstrate the potential for reducing the cost of kernel development for accelerator designers and kernel developers.

The efficiency of GPU kernels is central to the progress of modern AI, yet optimizing them remains a difficult and labor-intensive task due to complex interactions between memory hierarchies, thread scheduling, and hardware-specific characteristics. While recent advances in large language models (LLMs) provide new opportunities for automated code generation, existing approaches largely treat LLMs as single-shot generators or naive refinement tools, limiting their effectiveness in navigating the irregular kernel optimization landscape. We introduce an LLM agentic framework for GPU kernel optimization that systematically explores the design space through multi-agent collaboration, grounded instruction, dynamic context management, and strategic search. This framework mimics the workflow of expert engineers, enabling LLMs to reason about hardware trade-offs, incorporate profiling feedback, and refine kernels iteratively. We evaluate our approach on KernelBench, a benchmark for LLM-based kernel optimization, and demonstrate substantial improvements over baseline agents: our system produces correct solutions where baselines often fail, and achieves kernels with up to 16x faster runtime performance. These results highlight the potential of agentic LLM frameworks to advance fully automated, scalable GPU kernel optimization.

Writing GPU kernels is a challenging task and critical for AI systems' efficiency. It is also highly iterative: domain experts write code and improve performance through execution feedback. Moreover, it presents verifiable rewards like correctness and speedup, making it a natural environment to apply Reinforcement Learning (RL). To explicitly incorporate the iterative nature of this process into training, we develop a flexible multi-turn RL recipe that addresses unique challenges encountered in real-world settings, such as learning from long trajectories and effective reward attribution across turns. We present Kevin - K(ernel D)evin, the first model trained with multi-turn RL for CUDA kernel generation and optimization. In our evaluation setup, Kevin shows significant gains over its base model (QwQ-32B), improving correctness of generated kernels (in pure CUDA) from 56% to 82% and mean speedup from 0.53x to 1.10x of baseline (PyTorch Eager), and surpassing frontier models like o4-mini (0.78x). Finally, we study its behavior across test-time scaling axes: we found scaling serial refinement more beneficial than parallel sampling. In particular, when given more refinement turns, Kevin shows a higher rate of improvement.

Concurrent local LLM serving on unified-memory desktops must preserve memory headroom and output fidelity, which speed-only rankings overlook. We introduce SiliconBench, which evaluates nine Apple Silicon serving engines through three lenses: speed, memory, and fidelity. We evaluate chat and agent serving on Qwen3, Qwen3.5, and Gemma 4. We use a classification task to check for quality regressions against an NVIDIA reference. DGX Spark provides a complementary serving-performance reference. Three desiderata guide interpretation: serving architecture readiness, memory discipline, and multi-node scaling. On Qwen3-0.6B, vllm-metal alone more than doubles throughput on both workloads from concurrency 1 to 16. CUDA vLLM and SGLang show stronger concurrency scaling on the same prompts. Explicit memory budgets do not guarantee memory headroom: two stacks complete every request while memory use approaches physical capacity and throughput declines. The newer model architectures have narrower engine support. Their evaluated implementations match the fidelity reference. Only three stacks satisfy the completion, fidelity, and model-coverage gates. Comparisons on larger dense and MoE models reinforce the importance of scheduling prompt processing alongside ongoing generation: vllm-metal's packed prefill-decode path maintains lower first-token latency than omlx under concurrent load. In the tested two-machine configurations, tensor parallelism over Thunderbolt RDMA scales while pipeline parallelism over TCP regresses. We release benchmark code, per-run results, and maintenance journals, supported by a workflow combining bounded agent fixes with human review.

We present CRUXEval (Code Reasoning, Understanding, and eXecution Evaluation), a benchmark consisting of 800 Python functions (3-13 lines). Each function comes with an input-output pair, leading to two natural tasks: input prediction and output prediction. First, we propose a generic recipe for generating our execution benchmark which can be used to create future variation of the benchmark. Second, we evaluate twenty code models on our benchmark and discover that many recent high-scoring models on HumanEval do not show the same improvements on our benchmark. Third, we show that simple CoT and fine-tuning schemes can improve performance on our benchmark but remain far from solving it. The best setup, GPT-4 with chain of thought (CoT), achieves a pass@1 of 75% and 81% on input and output prediction, respectively. In contrast, Code Llama 34B achieves a pass@1 of 50% and 46% on input and output prediction, highlighting the gap between open and closed source models. As no model is close to acing CRUXEval, we provide examples of consistent GPT-4 failures on simple programs as a lens into its code reasoning capabilities and areas for improvement.

On the way to Exascale, programmers face the increasing challenge of having to support multiple hardware architectures from the same code base. At the same time, portability of code and performance are increasingly difficult to achieve as hardware architectures are becoming more and more diverse. Today's heterogeneous systems often include two or more completely distinct and incompatible hardware execution models, such as GPGPU's, SIMD vector units, and general purpose cores which conventionally have to be programmed using separate tool chains representing non-overlapping programming models. The recent revival of interest in the industry and the wider community for the C++ language has spurred a remarkable amount of standardization proposals and technical specifications in the arena of concurrency and parallelism. This recently includes an increasing amount of discussion around the need for a uniform, higher-level abstraction and programming model for parallelism in the C++ standard targeting heterogeneous and distributed computing. Such an abstraction should perfectly blend with existing, already standardized language and library features, but should also be generic enough to support future hardware developments. In this paper, we present the results from developing such a higher-level programming abstraction for parallelism in C++ which aims at enabling code and performance portability over a wide range of architectures and for various types of parallelism. We present and compare performance data obtained from running the well-known STREAM benchmark ported to our higher level C++ abstraction with the corresponding results from running it natively. We show that our abstractions enable performance at least as good as the comparable base-line benchmarks while providing a uniform programming API on all compared target architectures.

Machine learning models are increasingly embedded in everyday software, and most of their runtime is spent in a small set of compute kernels such as matrix multiplication, convolution, and normalization. Optimizing these kernels is one of the most direct ways to reduce latency and cost, but it has traditionally required expert engineers to hand-write low-level GPU code. Agentic systems built on large language models (LLMs) can now generate and optimize kernels with far less human effort, yet existing tools are largely evaluated on randomly generated tensors and isolated kernels, emit standalone CUDA code that developers must manually reintegrate, mostly target only LLM PyTorch models, and offer limited support for inspecting and debugging results. We present Kernel Forge, an open-source, end-to-end agentic harness that accepts any unmodified PyTorch model in place. Kernel Forge supports vision, diffusion, and LLM workloads, uses Monte Carlo Tree Search (MCTS) to explore multiple optimization paths rather than a single linear refinement chain, and ships with a graphical user interface for monitoring progress, inspecting candidate kernels, and debugging failures. We evaluate Kernel Forge on four PyTorch models spanning vision, diffusion, and LLM workloads on an NVIDIA DGX Spark with GB10 GPU. With only 50 optimization iterations per kernel, it optimizes 14 kernels to outperform PyTorch eager mode, reaching 1.52times on adaptive\_avgpool2d in ResNet-50, 1.70times on group\_norm in Stable Diffusion 3.5 Medium, 2.83times on softmax in Gemma 4 E2B, and 1.54times on softmax in Qwen 3.5 35B-A3B.

Multi-lingual competence in large language models is often evaluated via static data benchmarks such as Belebele, M-MMLU and M-GSM. However, these evaluations often fail to provide an adequate understanding of the practical performance and robustness of models across multi-lingual settings. In response, we create multi-lingual functional benchmarks -- Cross-Lingual Grade School Math Symbolic (CL-GSM Symbolic) and Cross-Lingual Instruction-Following Eval (CL-IFEval)-- by translating existing functional benchmark templates from English to five additional languages that span the range of resources available for NLP: French, Spanish, Hindi, Arabic and Yoruba. Our results reveal that some static multi-lingual benchmarks capture functional performance much more closely than others (i.e. across models, there is a 24%, 17% and 18% decrease in performance between M-GSM and CL-GSM Symbolic in English, French and Spanish respectively; similarly there's a 15 - 24% performance drop across languages between Belebele and CL-IFEval, and only a 0.5% to 3% performance drop between M-MMLU and CL-IFEval). Similarly, we find that model robustness across languages varies significantly, with certain languages (eg. Arabic, English) being the most consistently well performing across evaluation iterations.

Large Language Models (LLMs) have demonstrated strong capabilities in general-purpose code generation. However, generating the code which is deeply hardware-specific, architecture-aware, and performance-critical, especially for massively parallel GPUs, remains a complex challenge. In this work, we explore the use of LLMs for the automated generation and optimization of CUDA programs, with the goal of producing high-performance GPU kernels that fully exploit the underlying hardware. To address this challenge, we propose a novel framework called Feature Search and Reinforcement (FSR). FSR jointly optimizes compilation and functional correctness, as well as the runtime performance, which are validated through extensive and diverse test cases, and measured by actual kernel execution latency on the target GPU, respectively. This approach enables LLMs not only to generate syntactically and semantically correct CUDA code but also to iteratively refine it for efficiency, tailored to the characteristics of the GPU architecture. We evaluate FSR on representative CUDA kernels, covering AI workloads and computational intensive algorithms. Our results show that LLMs augmented with FSR consistently guarantee correctness rates. Meanwhile, the automatically generated kernels can outperform general human-written code by a factor of up to 179times in execution speeds. These findings highlight the potential of combining LLMs with performance reinforcement to automate GPU programming for hardware-specific, architecture-sensitive, and performance-critical applications.

Language model benchmarks are pervasive and computationally-efficient proxies for real-world downstream performance. However, many recent works find that benchmarks often fail to predict downstream utility. While some works have begun diagnosing sources of misalignment, there remain no ways to systematically update benchmarks to align their scores with downstream usage. Towards bridging this gap, we introduce and study benchmark alignment, where we use information about downstream model performance to automatically update benchmarks, specifically aiming to update static benchmarks so they generalizably rank models according to new pairwise preferences. Our experiments involving 4576 language models and 6 benchmarks show that reweighting benchmark items can successfully rank unseen models, even generalizing across model scales in most cases. And while naive alignment unsurprisingly requires large numbers of models and benchmark questions, an oracle experiment suggests this could be reduced to as few as 20 well-chosen models. Overall, our work takes a step towards efficiently aligning benchmark development with downstream tasks.\footnote{All of our code, models, and data are publicly-available.

The rapid proliferation of benchmarks for evaluating large language models (LLMs) has created an urgent need for systematic methods to assess benchmark quality itself. We propose Benchmark^2, a comprehensive framework comprising three complementary metrics: (1) Cross-Benchmark Ranking Consistency, measuring whether a benchmark produces model rankings aligned with peer benchmarks; (2) Discriminability Score, quantifying a benchmark's ability to differentiate between models; and (3) Capability Alignment Deviation, identifying problematic instances where stronger models fail but weaker models succeed within the same model family. We conduct extensive experiments across 15 benchmarks spanning mathematics, reasoning, and knowledge domains, evaluating 11 LLMs across four model families. Our analysis reveals significant quality variations among existing benchmarks and demonstrates that selective benchmark construction based on our metrics can achieve comparable evaluation performance with substantially reduced test sets.

Machine-learning (ML) hardware and software system demand is burgeoning. Driven by ML applications, the number of different ML inference systems has exploded. Over 100 organizations are building ML inference chips, and the systems that incorporate existing models span at least three orders of magnitude in power consumption and five orders of magnitude in performance; they range from embedded devices to data-center solutions. Fueling the hardware are a dozen or more software frameworks and libraries. The myriad combinations of ML hardware and ML software make assessing ML-system performance in an architecture-neutral, representative, and reproducible manner challenging. There is a clear need for industry-wide standard ML benchmarking and evaluation criteria. MLPerf Inference answers that call. In this paper, we present our benchmarking method for evaluating ML inference systems. Driven by more than 30 organizations as well as more than 200 ML engineers and practitioners, MLPerf prescribes a set of rules and best practices to ensure comparability across systems with wildly differing architectures. The first call for submissions garnered more than 600 reproducible inference-performance measurements from 14 organizations, representing over 30 systems that showcase a wide range of capabilities. The submissions attest to the benchmark's flexibility and adaptability.

Hyperparameter Optimization (HPO) is crucial to develop well-performing machine learning models. In order to ease prototyping and benchmarking of HPO methods, we propose carps, a benchmark framework for Comprehensive Automated Research Performance Studies allowing to evaluate N optimizers on M benchmark tasks. In this first release of carps, we focus on the four most important types of HPO task types: blackbox, multi-fidelity, multi-objective and multi-fidelity-multi-objective. With 3 336 tasks from 5 community benchmark collections and 28 variants of 9 optimizer families, we offer the biggest go-to library to date to evaluate and compare HPO methods. The carps framework relies on a purpose-built, lightweight interface, gluing together optimizers and benchmark tasks. It also features an analysis pipeline, facilitating the evaluation of optimizers on benchmarks. However, navigating a huge number of tasks while developing and comparing methods can be computationally infeasible. To address this, we obtain a subset of representative tasks by minimizing the star discrepancy of the subset, in the space spanned by the full set. As a result, we propose an initial subset of 10 to 30 diverse tasks for each task type, and include functionality to re-compute subsets as more benchmarks become available, enabling efficient evaluations. We also establish a first set of baseline results on these tasks as a measure for future comparisons. With carps (https://www.github.com/automl/CARP-S), we make an important step in the standardization of HPO evaluation.

Large Language Models (LLMs) have seen great advance in both academia and industry, and their popularity results in numerous open-source frameworks and techniques in accelerating LLM pre-training, fine-tuning, and inference. Training and deploying LLMs are expensive as it requires considerable computing resources and memory, hence many efficient approaches have been developed for improving system pipelines as well as operators. However, the runtime performance can vary significantly across hardware and software stacks, which makes it difficult to choose the best configuration. In this work, we aim to benchmark the performance from both macro and micro perspectives. First, we benchmark the end-to-end performance of pre-training, fine-tuning, and serving LLMs in different sizes , i.e., 7, 13, and 70 billion parameters (7B, 13B, and 70B) on three 8-GPU platforms with and without individual optimization techniques, including ZeRO, quantization, recomputation, FlashAttention. Then, we dive deeper to provide a detailed runtime analysis of the sub-modules, including computing and communication operators in LLMs. For end users, our benchmark and findings help better understand different optimization techniques, training and inference frameworks, together with hardware platforms in choosing configurations for deploying LLMs. For researchers, our in-depth module-wise analyses discover potential opportunities for future work to further optimize the runtime performance of LLMs.

Most existing neural architecture search (NAS) benchmarks and algorithms prioritize well-studied tasks, e.g. image classification on CIFAR or ImageNet. This makes the performance of NAS approaches in more diverse areas poorly understood. In this paper, we present NAS-Bench-360, a benchmark suite to evaluate methods on domains beyond those traditionally studied in architecture search, and use it to address the following question: do state-of-the-art NAS methods perform well on diverse tasks? To construct the benchmark, we curate ten tasks spanning a diverse array of application domains, dataset sizes, problem dimensionalities, and learning objectives. Each task is carefully chosen to interoperate with modern CNN-based search methods while possibly being far-afield from its original development domain. To speed up and reduce the cost of NAS research, for two of the tasks we release the precomputed performance of 15,625 architectures comprising a standard CNN search space. Experimentally, we show the need for more robust NAS evaluation of the kind NAS-Bench-360 enables by showing that several modern NAS procedures perform inconsistently across the ten tasks, with many catastrophically poor results. We also demonstrate how NAS-Bench-360 and its associated precomputed results will enable future scientific discoveries by testing whether several recent hypotheses promoted in the NAS literature hold on diverse tasks. NAS-Bench-360 is hosted at https://nb360.ml.cmu.edu.

Pre-training is notoriously compute-intensive and academic researchers are notoriously under-resourced. It is, therefore, commonly assumed that academics can't pre-train models. In this paper, we seek to clarify this assumption. We first survey academic researchers to learn about their available compute and then empirically measure the time to replicate models on such resources. We introduce a benchmark to measure the time to pre-train models on given GPUs and also identify ideal settings for maximizing training speed. We run our benchmark on a range of models and academic GPUs, spending 2,000 GPU-hours on our experiments. Our results reveal a brighter picture for academic pre-training: for example, although Pythia-1B was originally trained on 64 GPUs for 3 days, we find it is also possible to replicate this model (with the same hyper-parameters) in 3x fewer GPU-days: i.e. on 4 GPUs in 18 days. We conclude with a cost-benefit analysis to help clarify the trade-offs between price and pre-training time. We believe our benchmark will help academic researchers conduct experiments that require training larger models on more data. We fully release our codebase at: https://github.com/apoorvkh/academic-pretraining.

Progress in LLMs is increasingly measured through standardized benchmarks, where state-of-the-art improvements are often separated by fractions of a percentage point. At the same time, the computational cost of evaluating modern LLMs has driven widespread adoption of specialized inference backends, software systems that execute trained models efficiently at inference time. While critical for scalability, system-level optimizations, such as custom CUDA kernels and reduced-precision arithmetic, can alter token probabilities and introduce non-determinism, possibly cascading into divergent generation. In this work, we first survey the inference landscape, identifying 200 distinct engines, and analyze 35,000 ML publications, finding that the specific inference stack is rarely reported despite this widespread diversity. We then present a systematic empirical study of how inference backends affect LLM benchmark results. Holding model weights, decoding parameters, and hardware constant, we evaluate five widely used inference engines, including vLLM, SGLang, and llama.cpp, across multiple open-weight models and established benchmarks. We show that the choice of backend alone can shift benchmark scores by up to 16.6 percentage points and induce high rates of output disagreement. By isolating backend optimizations and tracing the execution pipeline, we find this divergence is driven by system-level optimizations like prefix caching and CUDA graphs, custom kernels, and engine-specific defaults in logit processing. Our findings identify the inference backend as a previously unreported but consequential hyperparameter in the evaluation of LLM and advocate standardized reporting of inference stacks to improve the reproducibility and interpretability of benchmark comparisons.

We present Kernel-Smith, a framework for high-performance GPU kernel and operator generation that combines a stable evaluation-driven evolutionary agent with an evolution-oriented post-training recipe. On the agent side, Kernel-Smith maintains a population of executable candidates and iteratively improves them using an archive of top-performing and diverse programs together with structured execution feedback on compilation, correctness, and speedup. To make this search reliable, we build backend-specific evaluation services for Triton on NVIDIA GPUs and Maca on MetaX GPUs. On the training side, we convert long-horizon evolution trajectories into step-centric supervision and reinforcement learning signals by retaining correctness-preserving, high-gain revisions, so that the model is optimized as a strong local improver inside the evolutionary loop rather than as a one-shot generator. Under a unified evolutionary protocol, Kernel-Smith-235B-RL achieves state-of-the-art overall performance on KernelBench with Nvidia Triton backend, attaining the best average speedup ratio and outperforming frontier proprietary models including Gemini-3.0-pro and Claude-4.6-opus. We further validate the framework on the MetaX MACA backend, where our Kernel-Smith-MACA-30B surpasses large-scale counterparts such as DeepSeek-V3.2-think and Qwen3-235B-2507-think, highlighting potential for seamless adaptation across heterogeneous platforms. Beyond benchmark results, the same workflow produces upstream contributions to production systems including SGLang and LMDeploy, demonstrating that LLM-driven kernel optimization can transfer from controlled evaluation to practical deployment.

Evaluating machine unlearning methods remains technically challenging, with recent benchmarks requiring complex setups and significant engineering overhead. We introduce a unified and extensible benchmarking suite that simplifies the evaluation of unlearning algorithms using the KLoM (KL divergence of Margins) metric. Our framework provides precomputed model ensembles, oracle outputs, and streamlined infrastructure for running evaluations out of the box. By standardizing setup and metrics, it enables reproducible, scalable, and fair comparison across unlearning methods. We aim for this benchmark to serve as a practical foundation for accelerating research and promoting best practices in machine unlearning. Our code and data are publicly available.

We report on the first large-scale mixture-of-experts (MoE) pretraining study on pure AMD hardware, utilizing both MI300X GPUs with Pollara interconnect. We distill practical guidance for both systems and model design. On the systems side, we deliver a comprehensive cluster and networking characterization: microbenchmarks for all core collectives (all-reduce, reduce-scatter, all-gather, broadcast) across message sizes and GPU counts on Pollara. To our knowledge, this is the first at this scale. We further provide MI300X microbenchmarks on kernel sizing and memory bandwidth to inform model design. On the modeling side, we introduce and apply MI300X-aware transformer sizing rules for attention and MLP blocks and justify MoE widths that jointly optimize training throughput and inference latency. We describe our training stack in depth, including often-ignored utilities such as fault-tolerance and checkpoint-reshaping, as well as detailed information on our training recipe. We also provide a preview of our model architecture and base model - ZAYA1 (760M active, 8.3B total parameters MoE) - which will be further improved upon in forthcoming papers. ZAYA1-base achieves performance comparable to leading base models such as Qwen3-4B and Gemma3-12B at its scale and larger, and outperforms models including Llama-3-8B and OLMoE across reasoning, mathematics, and coding benchmarks. Together, these results demonstrate that the AMD hardware, network, and software stack are mature and optimized enough for competitive large-scale pretraining.

Data-driven embodied AI is rapidly transitioning into a paradigm that scales training through massively parallel simulation, where GPU-accelerated simulators serve as the foundational data infrastructure. However, as computational throughput scales, the underlying trade-offs between parallel efficiency, physical fidelity, and execution determinism remain largely unexamined, hindering the development of reliable robot learning. In this paper, we expose the hidden limits of mainstream GPU-based robotic simulators (e.g., Isaac Lab, Genesis) by introducing GPUSimBench, which focuses on scalability, physical consistency, and computational determinism. First, GPUSimBench establishes a physical grounding evaluation with a controlled inclined-plane task, quantifying the distributional alignment between simulated dynamics and their real-world counterparts. Second, we benchmark parallel scalability by measuring throughput and memory footprints across scaling environment counts. Crucially, beyond standard performance metrics, we unveil and quantify the inherent non-determinism introduced by GPU-batched execution, characterized by significant run-to-run and inter-environment variability even under identical initial conditions. Finally, we identify four empirical regimes of stochasticity within current simulator stacks, highlighting that unbounded scaling can compromise reproducibility without explicit constraints.

We present a new approach for benchmarking Large Language Model (LLM) capabilities on research-level mathematics. Existing benchmarks largely rely on static, hand-curated sets of contest or textbook-style problems as proxies for mathematical research. Instead, we establish an updatable benchmark evaluating models directly on the latest research results in mathematics. This consists of an automatic pipeline that extracts lemmas from arXiv and rewrites them into self-contained statements by making all assumptions and required definitions explicit. It results in a benchmark that can be updated regularly with new problems taken directly from human mathematical research, while previous instances can be used for training without compromising future evaluations. We benchmark current state-of-the-art LLMs, which obtain around 10-15% accuracy in theorem proving (pass@1) depending on the model, showing that there is currently a large margin of progression for LLMs to reach human-level proving capabilities in a research context.

How can we test AI performance? This question seems trivial, but it isn't. Standard benchmarks often have problems such as in-distribution and small-size test sets, oversimplified metrics, unfair comparisons, and short-term outcome pressure. As a consequence, good performance on standard benchmarks does not guarantee success in real-world scenarios. To address these problems, we present Touchstone, a large-scale collaborative segmentation benchmark of 9 types of abdominal organs. This benchmark is based on 5,195 training CT scans from 76 hospitals around the world and 5,903 testing CT scans from 11 additional hospitals. This diverse test set enhances the statistical significance of benchmark results and rigorously evaluates AI algorithms across various out-of-distribution scenarios. We invited 14 inventors of 19 AI algorithms to train their algorithms, while our team, as a third party, independently evaluated these algorithms on three test sets. In addition, we also evaluated pre-existing AI frameworks--which, differing from algorithms, are more flexible and can support different algorithms--including MONAI from NVIDIA, nnU-Net from DKFZ, and numerous other open-source frameworks. We are committed to expanding this benchmark to encourage more innovation of AI algorithms for the medical domain.

Large Language Models (LLMs) are consistently improving at increasingly realistic software engineering (SE) tasks. In real-world software stacks, significant SE effort is spent developing foundational system software like the Linux kernel. Unlike application-level software, a systems codebase like Linux is multilingual (low-level C/Assembly/Bash/Rust); gigantic (>20 million lines); critical (impacting billions of devices worldwide), and highly concurrent (involving complex multi-threading). To evaluate if ML models are useful while developing such large-scale systems-level software, we introduce kGym (a platform) and kBench (a dataset). The kGym platform provides a SE environment for large-scale experiments on the Linux kernel, including compiling and running kernels in parallel across several virtual machines, detecting operations and crashes, inspecting logs, and querying and patching the code base. We use kGym to facilitate evaluation on kBench, a crash resolution benchmark drawn from real-world Linux kernel bugs. An example bug in kBench contains crashing stack traces, a bug-reproducer file, a developer-written fix, and other associated data. To understand current performance, we conduct baseline experiments by prompting LLMs to resolve Linux kernel crashes. Our initial evaluations reveal that the best performing LLM achieves 0.72% and 5.38% in the unassisted and assisted (i.e., buggy files disclosed to the model) settings, respectively. These results highlight the need for further research to enhance model performance in SE tasks. Improving performance on kBench requires models to master new learning skills, including understanding the cause of crashes and repairing faults, writing memory-safe and hardware-aware code, and understanding concurrency. As a result, this work opens up multiple avenues of research at the intersection of machine learning and systems software.

We revisit large kernel design in modern convolutional neural networks (CNNs). Inspired by recent advances in vision transformers (ViTs), in this paper, we demonstrate that using a few large convolutional kernels instead of a stack of small kernels could be a more powerful paradigm. We suggested five guidelines, e.g., applying re-parameterized large depth-wise convolutions, to design efficient high-performance large-kernel CNNs. Following the guidelines, we propose RepLKNet, a pure CNN architecture whose kernel size is as large as 31x31, in contrast to commonly used 3x3. RepLKNet greatly closes the performance gap between CNNs and ViTs, e.g., achieving comparable or superior results than Swin Transformer on ImageNet and a few typical downstream tasks, with lower latency. RepLKNet also shows nice scalability to big data and large models, obtaining 87.8% top-1 accuracy on ImageNet and 56.0% mIoU on ADE20K, which is very competitive among the state-of-the-arts with similar model sizes. Our study further reveals that, in contrast to small-kernel CNNs, large-kernel CNNs have much larger effective receptive fields and higher shape bias rather than texture bias. Code & models at https://github.com/megvii-research/RepLKNet.

Approximate nearest neighbor (ANN) search is a performance-critical component of many machine learning pipelines, and rigorous benchmarking is essential for assessing the performance of vector indexes for ANN search. However, the datasets of existing benchmarks no longer represent modern ANN applications, creating a need for an up-to-date benchmark. To address this gap, we introduce Vector Index Benchmark for Embeddings (VIBE), an open-source framework for benchmarking ANN algorithms. VIBE provides a pipeline for generating benchmark datasets with dense embedding models representative of modern applications, including retrieval-augmented generation (RAG). To represent real-world workloads, we also include out-of-distribution (OOD) datasets where the queries and the corpus are drawn from different distributions. These include multimodal retrieval datasets and maximum inner product search (MIPS) datasets covering two recent use cases: approximate attention computation and reductions of multi-vector retrieval to single-vector MIPS. We use VIBE to conduct a comprehensive evaluation of 22 open-source vector-index implementations across 11 in-distribution and 8 out-of-distribution datasets. The benchmark is available at https://github.com/vector-index-bench/vibe

Making deep learning recommendation model (DLRM) training and inference fast and efficient is important. However, this presents three key system challenges - model architecture diversity, kernel primitive diversity, and hardware generation and architecture heterogeneity. This paper presents KernelEvolve-an agentic kernel coding framework-to tackle heterogeneity at-scale for DLRM. KernelEvolve is designed to take kernel specifications as input and automate the process of kernel generation and optimization for recommendation model across heterogeneous hardware architectures. KernelEvolve does so by operating at multiple programming abstractions, from Triton and CuTe DSL to low-level hardware agnostic languages, spanning the full hardware-software optimization stack. The kernel optimization process is described as graph-based search with selection policy, universal operator, fitness function, and termination rule, dynamically adapts to runtime execution context through retrieval-augmented prompt synthesis. We designed, implemented, and deployed KernelEvolve to optimize a wide variety of production recommendation models across generations of NVIDIA and AMD GPUs, as well as Meta's AI accelerators. We validate KernelEvolve on the publicly-available KernelBench suite, achieving 100% pass rate on all 250 problems across three difficulty levels, and 160 PyTorch ATen operators across three heterogeneous hardware platforms, demonstrating 100% correctness. KernelEvolve reduces development time from weeks to hours and achieves substantial performance improvements over PyTorch baselines across diverse production use cases and for heterogeneous AI systems at-scale. Beyond performance efficiency improvements, KernelEvolve significantly mitigates the programmability barrier for new AI hardware by enabling automated kernel generation for in-house developed AI hardware.

Self-attention-based vision backbones perform well on dense prediction, but the quadratic computational cost of global softmax attention limits their efficiency as image resolution increases. We introduce Gated Token Recurrence (GTR), a softmax-free recurrent vision backbone that combines gated linear attention, alternating spatial scan directions, and spatially enhanced SwiGLU blocks. GTR is distilled from a detection-specialized DINOv3 teacher using only final-layer patch-token alignment through a linear projection and squared ell_2 loss, without masked-token prediction or intermediate-layer supervision. With Objects365 detector pre-training, GTR-L achieves 58.9 box AP on COCO val2017 with 1.908\,ms median batch-one latency under compiled FP16 execution on an RTX~4090. The same backbone also transfers to instance segmentation, pose estimation, oriented detection, semantic segmentation, and monocular depth estimation. In an isolated kernel benchmark, our specialized chunkwise CUDA operator is 4.0times faster than FLA v0.5.0 at 1.6K tokens on RTX~4090. TensorRT deployment on DRIVE AGX Thor achieves 2.282--8.769\,ms median batch-one latency across the evaluated models. These results show that recurrent token mixing can provide an efficient alternative to global softmax attention for high-resolution dense prediction and edge deployment. Project page: https://intellindust-ai-lab.github.io/projects/GTR/

Developing large language models is expensive and involves making decisions with small experiments, typically by evaluating on large, multi-task evaluation suites. In this work, we analyze specific properties which make a benchmark more reliable for such decisions, and interventions to design higher-quality evaluation benchmarks. We introduce two key metrics that show differences in current benchmarks: signal, a benchmark's ability to separate better models from worse models, and noise, a benchmark's sensitivity to random variability between training steps. We demonstrate that benchmarks with a better signal-to-noise ratio are more reliable when making decisions at small scale, and those with less noise have lower scaling law prediction error. These results suggest that improving signal or noise will lead to more useful benchmarks, so we introduce three interventions designed to directly affect signal or noise. For example, we propose that switching to a metric that has better signal and noise (e.g., perplexity rather than accuracy) leads to better reliability and improved scaling law error. We also find that filtering noisy subtasks, to improve an aggregate signal-to-noise ratio, leads to more reliable multi-task evaluations. We also find that averaging the output of a model's intermediate checkpoints to reduce noise leads to consistent improvements. We conclude by recommending that those creating new benchmarks, or selecting which existing benchmarks to use, aim for high signal and low noise. We use 30 benchmarks for these experiments, and 375 open-weight language models from 60M to 32B parameters, resulting in a new, publicly available dataset of 900K evaluation benchmark results, totaling 200M instances.

As large language models (LLMs) continue to advance, the need for up-to-date and well-organized benchmarks becomes increasingly critical. However, many existing datasets are scattered, difficult to manage, and make it challenging to perform evaluations tailored to specific needs or domains, despite the growing importance of domain-specific models in areas such as math or code. In this paper, we introduce BenchHub, a dynamic benchmark repository that empowers researchers and developers to evaluate LLMs more effectively. BenchHub aggregates and automatically classifies benchmark datasets from diverse domains, integrating 303K questions across 38 benchmarks. It is designed to support continuous updates and scalable data management, enabling flexible and customizable evaluation tailored to various domains or use cases. Through extensive experiments with various LLM families, we demonstrate that model performance varies significantly across domain-specific subsets, emphasizing the importance of domain-aware benchmarking. We believe BenchHub can encourage better dataset reuse, more transparent model comparisons, and easier identification of underrepresented areas in existing benchmarks, offering a critical infrastructure for advancing LLM evaluation research.

Click-through rate (CTR) prediction is a critical task for many applications, as its accuracy has a direct impact on user experience and platform revenue. In recent years, CTR prediction has been widely studied in both academia and industry, resulting in a wide variety of CTR prediction models. Unfortunately, there is still a lack of standardized benchmarks and uniform evaluation protocols for CTR prediction research. This leads to non-reproducible or even inconsistent experimental results among existing studies, which largely limits the practical value and potential impact of their research. In this work, we aim to perform open benchmarking for CTR prediction and present a rigorous comparison of different models in a reproducible manner. To this end, we ran over 7,000 experiments for more than 12,000 GPU hours in total to re-evaluate 24 existing models on multiple datasets and settings. Surprisingly, our experiments show that with sufficient hyper-parameter search and model tuning, many deep models have smaller differences than expected. The results also reveal that making real progress on the modeling of CTR prediction is indeed a very challenging research task. We believe that our benchmarking work could not only allow researchers to gauge the effectiveness of new models conveniently but also make them fairly compare with the state of the arts. We have publicly released the benchmarking code, evaluation protocols, and hyper-parameter settings of our work to promote reproducible research in this field.

Neural information retrieval (IR) systems have progressed rapidly in recent years, in large part due to the release of publicly available benchmarking tasks. Unfortunately, some dimensions of this progress are illusory: the majority of the popular IR benchmarks today focus exclusively on downstream task accuracy and thus conceal the costs incurred by systems that trade away efficiency for quality. Latency, hardware cost, and other efficiency considerations are paramount to the deployment of IR systems in user-facing settings. We propose that IR benchmarks structure their evaluation methodology to include not only metrics of accuracy, but also efficiency considerations such as a query latency and the corresponding cost budget for a reproducible hardware setting. For the popular IR benchmarks MS MARCO and XOR-TyDi, we show how the best choice of IR system varies according to how these efficiency considerations are chosen and weighed. We hope that future benchmarks will adopt these guidelines toward more holistic IR evaluation.

Leech-lattice vector quantization holds the strongest reported 2-bit quality under its own evaluation protocol. Its kernel decodes one shell; we found no implementation of the multi-shell decoder the rate requires. This paper supplies one and measures its serving cost for decode-phase GEMV at batch 1. First, a serving path for the full 301-class codebook: an offline expansion into GPU layouts and a fused dequantize-plus-matvec kernel reading them without warp divergence, verified against f64. Second, the in-VRAM rate is a design axis distinct from the on-disk rate. Four bit-exact layouts timed in one process show binary bit planes beating one-hot masks on size and speed at constant bandwidth (4.80 bits per weight, 2.15x FP16). Below 4.3 bits a second, irregular stream enters; at 3.6 the decode stops being shifts and masks. Third, deployed four-bit (AWQ) and two-bit (QTIP) GEMV kernels run in the same process. The trellis kernel reads 2.40x fewer bytes than our served layout and runs 2.27x faster at near-equal fractions of their byte bounds: the time gap tracks the traffic gap, the price of unfolding a codebook too large for a lookup table. Fourth, the validity envelope: the trellis kernel outruns our no-weights control, so our launch geometry sets that floor, and on a second memory hierarchy every lattice arm falls below FP16. With the output head held identical across arms, the kernel-and-format path gains 1.11x, 1.29x and 1.41x end to end at 4B, 8B and 14B; with an int8 output head the served 4B reaches 87.0 tok/s in 2.60 GB. The quality cost, 1.38x perplexity and 14.7 MMLU points at 4B, shrinks across the three sizes measured.

Traditional fixed test sets fall short in evaluating open-ended capabilities of foundation models. To address this, we propose ONEBench(OpeN-Ended Benchmarking), a new testing paradigm that consolidates individual evaluation datasets into a unified, ever-expanding sample pool. ONEBench allows users to generate custom, open-ended evaluation benchmarks from this pool, corresponding to specific capabilities of interest. By aggregating samples across test sets, ONEBench enables the assessment of diverse capabilities beyond those covered by the original test sets, while mitigating overfitting and dataset bias. Most importantly, it frames model evaluation as a collective process of selecting and aggregating sample-level tests. The shift from task-specific benchmarks to ONEBench introduces two challenges: (1)heterogeneity and (2)incompleteness. Heterogeneity refers to the aggregation over diverse metrics, while incompleteness describes comparing models evaluated on different data subsets. To address these challenges, we explore algorithms to aggregate sparse measurements into reliable model scores. Our aggregation algorithm ensures identifiability(asymptotically recovering ground-truth scores) and rapid convergence, enabling accurate model ranking with less data. On homogenous datasets, we show our aggregation algorithm provides rankings that highly correlate with those produced by average scores. We also demonstrate robustness to ~95% of measurements missing, reducing evaluation cost by up to 20x with little-to-no change in model rankings. We introduce ONEBench-LLM for language models and ONEBench-LMM for vision-language models, unifying evaluations across these domains. Overall, we present a technique for open-ended evaluation, which can aggregate over incomplete, heterogeneous sample-level measurements to continually grow a benchmark alongside the rapidly developing foundation models.

Meta deploys a heterogeneous fleet comprising NVIDIA GPUs, AMD GPUs, and proprietary MTIA accelerators to reduce costs and mitigate vendor lock-in. However, the extensive history of NVIDIA-specific optimizations hinders performance portability to other hardware. This paper presents our methods for optimizing alternative accelerators, using AMD Instinct MI350X versus NVIDIA B200 for recommendation model training as a case study. We propose three reusable principles. First, hardware-model co-design is essential: rather than directly porting models from NVIDIA GPUs, revising model structures and software recipes allows full exploitation of accelerator-specific strengths (e.g., MI350X's 1.6x HBM capacity relative to B200). Second, our analytical performance model enables zero-warmup optimal kernel selection across diverse datatypes and matrix shapes in production models, drastically simplifying tuning. Third, increasingly mature agentic workflows have lowered the barrier to porting from the CUDA ecosystem; we extend these workflows for microarchitecture-aware kernel optimizations and custom shim generation. Compared to the directly ported baseline, these methods deliver up to 1.5x improvement in end-to-end training throughput. To our knowledge, this is the first hyperscaler report on productionizing AMD GPUs for large-scale training. Our contributions have been upstreamed to the open-source PyTorch, Triton, and ROCm ecosystems.